GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


Reply
 
Thread Tools Display Modes
  #101  
Old 07-23-2018, 03:44 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default

Trying to resolve a few things while I am waiting on parts to arrive.

I cleaned up the clutch and it doesn't look too bad now. It definitely needs new fibers because of spots of rust, even though the fibers, steels and springs were all well within spec, almost at the spec for new items.





Here is the outer basket.



Reverse side of the outer basket.







__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote


  #102  
Old 07-29-2018, 12:31 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default Pro Grip Rally Grips and Other Stuff

Still waiting on powdercoater and new parts, so I tried to finish up a few other things.

Cut the old scott gripe off the throttle.


I disassembled the throttle and cleaned up the inside of the throttle tube with a dremel and a wire wheel.




I ran a tap through the pro tapers so I can can mount hand guards.


This is the throttle after cleanup ready for new Pro Grip Rally Grips to be mounted,glued and safety wired.




MSR Raptor Clutch lever.


__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

Last edited by Moto7man; 07-29-2018 at 07:29 PM. Reason: grammer
Reply With Quote
  #103  
Old 07-29-2018, 12:40 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default

Finished throttle with new grip glued and safety wired with new assembly bolts.



Bars are ready to mount up.

__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote
  #104  
Old 07-31-2018, 11:19 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default Mastercross Parts/Motos Italy-Watercooled RM 500

Just got these Oem nos radiator louvers yesterday. I have been looking for these everywhere. I found these in Italy of all places. His name is Tiziana and speaks ok English. I had my parts in 14 days. He has vintage works parts, he builds aluminum tanks and he has a bunch of bikes for sale.

Suzuki NOS Louvers



Like this water cooled 1985 RM 500



http://www.mastercross.net/index_eng.html
Click the flag at the bottom and his page will load in English.
__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

Last edited by Moto7man; 07-31-2018 at 11:34 PM. Reason: add photo add link
Reply With Quote
  #105  
Old 08-03-2018, 01:30 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default EBC Grooved Brake Shoes have Arrived

I just contacted my powdercoater, he is a great guy and he is covered up with work so it will be two more weeks before he has my frame, engine, triples, hubs etc finished. I don't mind waiting because he does it the right way the first time.

I did receive some stuff that the average young rider has never seen.

RM 250 EBC Grooved brake shoes!






The grooves are supposed to channel any water or debris out of the shoes.

__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote
  #106  
Old 08-03-2018, 05:20 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default More Stuff

A few more items just arrived.



New front brake perch with shorty lever. I am gonna replace those phillips screws with allen bolts.



This is actually a Oem NOS KX stop switch, but it mounts right up with the RM harness.



Motion Pro front brake cable.



Motion Pro throttle cable.

__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote
  #107  
Old 08-03-2018, 08:37 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 1,054
Default

That RM. I've watercooled a couple of aircooled bikes, but I haven't seen one direct drive off the flywheel before, except by belt. That's a lot cleaner than I would have expected.
__________________
'07 EC300
496 CPI Cheetah RZ/RGV hybrid
675 Street Triple R
RS125 framed MB100 racer
Stinger T125 Suzuki
Reply With Quote
  #108  
Old 08-03-2018, 10:13 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default

Quote:
Originally Posted by (F5) View Post
That RM. I've watercooled a couple of aircooled bikes, but I haven't seen one direct drive off the flywheel before, except by belt. That's a lot cleaner than I would have expected.
It’s kinda cool, isn?t it?
__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

Last edited by Moto7man; 08-03-2018 at 10:13 PM. Reason: Grammer
Reply With Quote
  #109  
Old 08-16-2018, 05:40 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,025
Default First Pictures From the Powdercoater!

Frame.



Brake Pedal and Footpegs.

__________________
2011 GG EC 300E, 1994 CR 250R and 1984 RM 250 E

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
94 CR 250 Ground Up Restoration IMS Wide Ratio Transmission Issue Moto7man All Other Bikes... 146 01-28-2018 05:57 PM
1994 CR 250 Restoration featured on Dirt Bike Magazine Webpage Moto7man Pictures & Videos 8 10-28-2017 09:12 AM
Gas Gas Contact Jt 25 95 Restoration And Help Eyetech General Discussions & Announcements 1 03-18-2016 03:33 PM
2001 XC200 Restoration Project Lincolnlock Enduro Engine - 2 stroke 19 04-22-2014 03:42 PM
My Stomping ground swazi_matt Ride Reports 10 03-02-2011 09:35 AM




All times are GMT -5. The time now is 08:16 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org