#1421
|
||||
|
||||
Quote:
RB |
#1422
|
||||
|
||||
Forgive me for asking.... he did have 2 stroke oil in the fuel didn't he?
|
#1423
|
||||
|
||||
He did have Klotz R50 in it and the sparkplug looks terrific. I checked it before I bought it.
My guess is either the rod let go or a crank stuffer bolt came out. I will see if I can make time to pull the engine tonight. I really hope the cases can be saved because I do not have any spares for that engine. |
#1424
|
||||
|
||||
I guess some welding and milling should do the trick?
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1425
|
||||
|
||||
If all goes well that should take care of it. This is a 2002 so the cases are different from the 2011 and newer bikes. Otherwise I would buy the bottom end on the parts link. The cases and crank were different in 2011.
|
#1426
|
||||
|
||||
Fit up a 5.8kg/mm spring, changed the oil and stiffened the rebound valving. Wrote it all down so I will get it on a thread here with the forks valving as well soon.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#1427
|
|||
|
|||
That's great Nate. Look forward to seeing the Gasser's valve stacks. I'm about to dive in their myself
__________________
GG GP300 18 KTM 350EXC 17 GG EC 450, GG EC 250 08, KTM 525 EXC 06, KTM 400 EXC 01, XR400 97, VTR1000 98, VFR750 95, Husaberg FE400 96, RMX250 91, Maico 490 84, IT250J 81, RM250C2 79, Bultaco Alpina 250 77 - All sold |
#1428
|
||||
|
||||
Started the annual winter service. Tried out the HydraForce to pump out some dents on the exhaust expansion chamber.
It worked well, actually so well that a weld split open. Off to the local welder, then... Also started rebuilding the forks and removed the shock to send it off to Reiger for service.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1429
|
|||
|
|||
New sprockets went from 13-47 to 13-50 on my 1998 ec250 now itching to test it
|
#1430
|
|||
|
|||
Fixing a my new (neglected) 2012 EC 300
Replaced the counter shaft seal and bushing. Tomorrow, replace the exhaust gasket, eat turkey and repack the silencer.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNF today | Pepperami | Enduro Chassis & Body | 6 | 09-18-2013 11:59 AM |
Got my first GG today! | RonMexico | General Discussions & Announcements | 6 | 02-19-2011 12:39 PM |
Went Riding Today and..... | coolum74 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 11-30-2008 01:12 PM |
HELP! I tried to use my gasgas as a jet ski today! | sammyj18 | General Discussions & Announcements | 19 | 11-21-2008 08:01 PM |
SHNF From Today | Boomhauer | Pictures & Videos | 13 | 10-30-2007 04:18 PM |