Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-14-2008, 02:06 PM
stay_upright's Avatar
stay_upright stay_upright is offline
Senior Member
 
Join Date: Jan 2008
Location: Coventry UK
Posts: 460
Default Periodically remove and re-fit all bolts?

Just wondering since the swing-arm is out I may remove and re-fit the bolts in there for no other reason than to stop them seizing in the future - is it worth it, would you do it?


__________________
'05 Gas Gas 300
'97 Aprilia Pegaso 650
'99 KTM 200
'95 ish XR630 (died many times in Oz)
Reply With Quote


  #2  
Old 01-14-2008, 02:24 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

You should be re-greasing the bearings at the same time. I do mine once a year, but guys that ride more frequently may do it it twice a year or more.
Reply With Quote
  #3  
Old 01-14-2008, 07:56 PM
ramcclure200's Avatar
ramcclure200 ramcclure200 is offline
Senior Member
 
Join Date: Apr 2007
Location: Pensacola, Florida
Posts: 195
Default

Sure its worth it!

Remember your rear suspension will work to its full potential when every thing is periodically greased, same goes for your front end as well.

The parts will come apart and go back together a lot easier by doing it regular also.


04 DE200
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Torquing Bolts wbagwell Enduro Engine - 2 stroke 7 06-10-2014 07:36 AM
how do you remove the kickstart noobi Enduro Chassis & Body 13 09-22-2011 03:31 PM
Remove front axle BULTACOBRIS General Discussions & Announcements 2 03-10-2009 10:28 AM
How best to remove carbon from PV components? d2w Enduro Engine - 2 stroke 9 02-21-2008 09:03 PM
What's the best way to remove the master link plate after it's pressed on? MattR Enduro Chassis & Body 12 01-28-2007 12:15 PM




All times are GMT -5. The time now is 05:45 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org