Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 09-21-2016, 02:24 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default Swingarm shims...

Just took my swingarm off as I'm doing an engine rebuild. Does anyone else have shims on the outermost part of their swingarm? The parts manual shows none, but I had shims, I can't imagine they are original as the ID is smaller than the center roller. Can only imagine they were put there afterwards, anyway, I've ordered some 22x32x1 shims that will clear the centre roller but help retain the o-rings, unless its common to shim the whole assembly width?


__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote


  #2  
Old 09-23-2016, 07:40 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

I have never seen them but i suppose they could be used to align the sprockets.
Reply With Quote
  #3  
Old 10-09-2016, 08:46 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

I bought some stainless shims slightly larger than the top hat/inner race to take uo the gap between the frame and the o-ring.
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ohlins shock shims kiwigasgas Enduro Suspension 10 08-25-2016 08:13 PM
Shims to spare... SGM Enduro Suspension 1 11-30-2012 10:12 AM
Buying Shims - Where? Idahocharley Enduro Suspension 3 12-19-2011 08:46 AM
Where order shims borsiin Enduro Suspension 5 12-10-2008 04:45 AM
Marzocchi 45 stock shims vavido Enduro Suspension 2 05-28-2008 04:31 PM




All times are GMT -5. The time now is 03:48 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org