|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Battery problem
Hi, i have a problem with my Gas Gas ec-e 300 2014.
My battery wouldn t charge, light and other equipment work normal but on full throttle it start to bug. Every information is helpful. Last edited by GasGasRider_; 08-02-2020 at 01:42 PM. |
#2
|
|||
|
|||
How did you find out that the battery isn't charged? Did you measure what voltage you have at the battery terminals when the engine is running and revved?
|
#3
|
|||
|
|||
It is 12,80v all time, when i open light it fall on 12,45v
|
#4
|
||||
|
||||
So it's not charging.
,measure the AC voltage from the stator. Should be say 50v ac. Then into rectifier..
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#5
|
|||
|
|||
Stator has been removed , does the engine have to run for examine it
|
#6
|
|||
|
|||
You can certainly inspect it out of the bike, but it's got be in place to check the voltage output with the engine running. With it removed you can do resistance checks to see if any windings are "open" (broken).
__________________
2011 EC250E |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bike won't run without battery and won't charge battery | memphis2857 | Enduro Electrical & Wiring | 3 | 04-28-2017 09:02 PM |
Battery problem? | tzsuzuki | Enduro Electrical & Wiring | 12 | 01-20-2016 10:18 AM |
I bought a 2000 xc and keep finding problem after problem | 675AZ | Enduro Engine - 2 stroke | 12 | 02-15-2013 07:25 PM |
Battery for a 07 450? | fastisbetter | Enduro Electrical & Wiring | 2 | 03-29-2011 08:06 PM |
battery power problem | GalenaGasGas | Enduro Electrical & Wiring | 3 | 04-15-2009 03:06 PM |