Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 03-12-2015, 04:39 PM
m nipper m nipper is offline
Member
 
Join Date: Sep 2014
Posts: 7
Default

Also do I check the floats for markings as to what model carb it is


Reply With Quote


  #12  
Old 03-12-2015, 05:16 PM
memphis2857 memphis2857 is offline
Senior Member
 
Join Date: Aug 2011
Posts: 970
Default Keihin PWK Needle Chart

The float level adjustment is what Jakobi is referring too. Look at the top of your carburetor and tell us what it looks like. Also need to determine if it is a 36 or 38 mm. Should be stamped on the carb body somewhere


Sent from my iPhone using Tapatalk
Reply With Quote
  #13  
Old 03-12-2015, 07:26 PM
m nipper m nipper is offline
Member
 
Join Date: Sep 2014
Posts: 7
Default

Great i will get a Nedj needle and give that a go its got 2 screws holding the top on glad u said that because I wasnt looking forward to trying to get the bowl off again to check the floats I'll get back to you with my results if u have any more thoughts on this let me no i realy apriciate all the help
Reply With Quote
  #14  
Old 03-12-2015, 10:35 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Float height for the AS is 6.5mm, but we've found setting it to 7.5-8mm improves everything and doesn't starv it for fuel. See the sticky in this subsection.
Reply With Quote
  #15  
Old 03-13-2015, 04:17 PM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

you will need to take bowl off to set float,and remove carb to do it prop.might be easier to try nedj needle first,see how it goes,then if necessary remove carb and check float level(a little fiddly to get exact).does fuel overflow tube run when bike leaned sideways?(45 degrees).the ned? series needles give nice smooth delivery,consequently the 'hit' may feel a little softer,although its prob not
__________________
2013 ec200r
Reply With Quote
  #16  
Old 03-14-2015, 06:45 AM
m nipper m nipper is offline
Member
 
Join Date: Sep 2014
Posts: 7
Default

Thats what I was thinking I will get a nedj needle run my 175 main and check before adjusting my float i hope its not nessasary have never noticed it starve of fule although I presume it could when i change needel the carb never overflows I dont think I have seen a drip come out ever.as long as it doesn't do either it shouldnt need adjusting right? Do you think there is anything else I should get at the same time maby a nedw I have 4 main jets and 4 pilots all the ones mentioned just a couple more things should I take the muffler off and poke something down to check for a spark arestor or cat and i have been told to run it on 40.1 by a friend but I don't realy want to because gas gas manual states 50.1 and if jetted correctly this should be fine right? I presume that is what you guys run?
Reply With Quote
  #17  
Old 03-14-2015, 07:26 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Oil ratio is a personal thing. Anywhere from 40:1 to 50:1 would be standard. Some run more oil, some run less. The important thing is that there is enough oil in circulation to keep the parts lubricated, and that you stick to a brand of oil at a certain ratio and then jet around that (not vice versa).
Reply With Quote
  #18  
Old 03-14-2015, 07:29 AM
barossi73's Avatar
barossi73 barossi73 is offline
Gold Level Site Supporter
 
Join Date: Jan 2014
Posts: 551
Default

40:1 for me,for peace of mind,and cause that's the recommendation on the belray h1r.which oil?what does it say on the bottle?
__________________
2013 ec200r
Reply With Quote
  #19  
Old 05-01-2017, 11:30 AM
PFD023 PFD023 is offline
Member
 
Join Date: Jan 2017
Location: North Bay, Ontario, Canada
Posts: 25
Default

Trying to order a NE1G needle for my AS1 carb. Going to the Keihin order sheet and I have no idea what the corresponding code is for that needle....anyone have an idea?
Attached Images
File Type: jpg 30.jpg (128.2 KB, 164 views)
Reply With Quote
  #20  
Old 05-01-2017, 06:05 PM
Zrt1200 Zrt1200 is offline
Senior Member
 
Join Date: Mar 2016
Location: Mid Michigan
Posts: 199
Default

This is what I go to when it comes time for Jetting.

http://www.jetsrus.com/a_jets_by_car...n_N427-48.html

And

http://www.kyajet.de/
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Needle Chart Brian Enduro Intake/Carburetion - 2 stroke 2 11-23-2010 02:29 PM
cdi chart? stainlesscycle Enduro Electrical & Wiring 4 04-19-2010 06:57 AM
Dyno Chart Grampy Enduro Engine - 2 stroke 1 12-17-2008 08:56 PM
KEIHIN float valve nhrider Enduro Intake/Carburetion - 2 stroke 1 06-17-2008 01:10 PM
Keihin Carb Harry Enduro Engine - 2 stroke 4 05-30-2007 06:52 AM




All times are GMT -5. The time now is 12:59 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org