|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Stuck bolt, bent allen key, 2013 XC300 front brake rebuild.
Anyone have any tips to remove the small bolt pictured below. Went to split the calipers to rebuild the front brake and install new pads, and after a week of spraying penetrating oil, the only thing that moves is the allen wrench as it bends...
What should I use? Heat or an impact? I tried a pin torch (gas soldering iron), but no luck... Thanks!
__________________
Edit: I am done caring why my apostrophes always turn to question marks!!!... |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stuck front brake pin | Trailrider | Enduro Chassis & Body | 8 | 04-26-2018 10:01 AM |
Front brake master cylinder rebuild kit | Joper | Enduro Chassis & Body | 0 | 03-17-2018 01:25 PM |
PV Allen bolt stuck | Shooter | Enduro Engine - 2 stroke | 5 | 04-05-2015 03:23 PM |
Banjo Bolt - Front Brake M/C | JP4 | Enduro Chassis & Body | 10 | 12-04-2013 09:54 PM |
Rebuild kit for '06 EC 300 Nissin front brake MC? | brider | Enduro Chassis & Body | 0 | 03-10-2013 10:30 AM |