Motocross center graphics?

[byost]

Has anyone installed the "Factory Racing" graphics from Motocrosscenter on a 2011? I recently purchased a complete kit from them, Polisort plastics and graphics but when I unpacked everything I noticed the graphics GG part#
BF950000RCT2512 were labeled 2012. I emailed Mikel at MX center and told him, he sent another kit, same thing 2012. I know that I have seen a 2011 on this forum with these graphics on it but I don't see how the radiator shroud graphics for a 2012 will line up with 2011 shrouds.

[desertgasser300]

Originally Posted by byost

Has anyone installed the "Factory Racing" graphics from Motocrosscenter on a 2011? I recently purchased a complete kit from them, Polisort plastics and graphics but when I unpacked everything I noticed the graphics GG part#
BF950000RCT2512 were labeled 2012. I emailed Mikel at MX center and told him, he sent another kit, same thing 2012. I know that I have seen a 2011 on this forum with these graphics on it but I don't see how the radiator shroud graphics for a 2012 will line up with 2011 shrouds.

They dont!

[Moto7man]

I was getting ready to buy this kit for my 2011,

http://www.motocrosscenter.com/ecomm...ducts_id=12322

When you put in your part number BF950000RCT2512, it specifies a 2011 on the site I have seen these mounted on a 2011 and there is a photo on this site. I don't know if they had to modify the decals. How did you order these they show out of stock on the MXC webpage?

[byost]

The kit I ordered was ref#11984. It was listed as out of stock but the sent me an email saying they could get it from the factory. I have tried to explain to them that the last 4 didgits of the GG part number are obviously for a 2012 but there seems to be a comunication gap! iimage.jpg

[Moto7man]

If you compare your part number and your reference numbers, it seems that one kit is graphics only and the reference number kit is graphics and plastics. Photos for the part number and reference number both show photos for a 2011. I will try to find the posted photo on this site of a 2011 with those graphics.

[nknudsen]

Originally Posted by byost

The kit I ordered was ref#11984. It was listed as out of stock but the sent me an email saying they could get it from the factory. I have tried to explain to them that the last 4 didgits of the GG part number are obviously for a 2012 but there seems to be a comunication gap! iAttachment 4983

Keep in mind the 2012 & 2013 four stroke are the old body bikes (2011 and older 2 stroke body style). Disregard if I'm not following this post correctly.

[byost]

image.jpg

I was told by Mikel at MX center that the 2012 4 strokes used the same shrouds as the 2011 2 strokes, but this doesn't look right to me. Please excuse the inverted image!

[nknudsen]

Is there a separate graphic piece that gets applied separately to complete the shroud graphic? It looks like the 2011 style to me missing a piece of graphic along the seat area.

[byost]

Originally Posted by nknudsen

Is there a separate graphic piece that gets applied separately to complete the shroud graphic? It looks like the 2011 style to me missing a piece of graphic along the seat area.

Here is the picture from MX Center web site
httpwww.motocrosscenter.comecommerceimagesthumbs_cachekit_gas_gas_2012_carreras_mod2.jpg

[nknudsen]

That's the picture I was looking at and thought it looked very close but missing the part near the seat. How close are they when you compare / size them up to your shrouds?