|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Clutch friction plates
After everything I have read it seems oem clutch plates are the best way to go. I seem to be having a hard time locating oem clutch parts. Would like to purchase just oem friction plates if possible. Any help would be greatly appreciated. I live in the US but don't mind ordering from overseas. Thanks for your help!
Scott 2011 GasGas EC300 Six Days |
#2
|
|||
|
|||
Surely EBC would be your best bet? Chances are they are oem anyway, not bike manufacturer would bother producing their own. What is the problem you are trying to solve or do they just need changing?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#3
|
|||
|
|||
Call Halls Cycles or Matto Cycles. I'm sure one of them will have them or can get them. Especially since the same clutch has been used for so many years
Sent from my iPhone using Tapatalk |
#4
|
|||
|
|||
Just replacing. Steels are fine with no coloring. Just would like to change friction plates.
|
#5
|
|||
|
|||
I found a EBC part number but it shows for the 2 strokes 2002 - 2008. Mines a 20011. Anyone know if they used the same clutch plates for the later year bikes like mine? Thanks!
Scott |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch Friction Disk Cleanup thread | swazi_matt | Enduro Engine - 2 stroke | 5 | 03-01-2015 01:17 AM |
Friction Plates | Jacob 'Berg | Enduro Chassis & Body | 1 | 02-16-2015 02:13 PM |
Clutch Friction Point | mcnut | Enduro Engine - 2 stroke | 13 | 05-09-2011 08:56 PM |
clutch plates | blanc | Enduro Engine - 2 stroke | 3 | 03-18-2011 05:08 AM |
clutch plates | mxdj2003 | Enduro Engine - 2 stroke | 4 | 11-02-2009 01:37 PM |