|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Metal shavings in bendix and stator gear
Last ride my starter wouldn?t work at all and made a horrible grinding noise and wouldn?t engage. At first I thought it was from the first picture of the broken lead on the starter. Just figured the starter wasn?t getting enough juice to turn everything because of the bad connection (maybe this is what caused the next problems?). Today I pulled the stator cover off and saw metal shavings on the magnet. Then I looked at the ring gear around the stator and the teeth are worn and have metal missing from them. Very noticeable on some teeth. Same with the bendix gear. I recently did the wet mod but have ridden a few times since then and the starter had worked great until this last time. When I pulled the cover the oil was clean and the gears all are lubed. Any ideas what could?ve caused this?
Last edited by GG221; 08-08-2019 at 09:22 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Metal shavings. What's normal? | fastisbetter | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 07-16-2016 09:29 AM |
Metal on metal sound when O-rings from exhaust wear out. | Scar13 | Enduro Engine - 2 stroke | 13 | 02-02-2013 08:19 PM |
Gear lever - cant change up, rubbing on stator coil cover | KTMAndy | Enduro Chassis & Body | 7 | 04-05-2012 09:38 AM |
transmission drain plug shavings | krazy | Enduro Engine - 2 stroke | 2 | 01-18-2012 06:35 PM |
Metal shavings in oil | mikemoto | General Discussions & Announcements | 4 | 08-28-2011 10:51 PM |