Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-25-2018, 01:24 PM
jcs003 jcs003 is offline
Member
 
Join Date: Jan 2018
Posts: 45
Default 36mm Carb Jetting

I have a 2005 250EC. what would be a good starting place to jet with a 36mm PWK?

Thank you,

John


Reply With Quote


  #2  
Old 01-26-2018, 12:17 PM
ssaulnier's Avatar
ssaulnier ssaulnier is offline
Silver Level Site Supporter
 
Join Date: Oct 2017
Location: San Antonio, Texas
Posts: 79
Default

Why are you going to a smaller carb than the 38mm stocker?
What slide is in the carb?
What temperature and elevation?
What needle do you like?

I like the Suzuki needles NExx series and the Honda 1370 DKA series too, because they give a linear increase in power and not as much of a hit.
Reply With Quote
  #3  
Old 01-27-2018, 10:44 AM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,418
Default

The 36 has been supplied on 250s and 300s on various years. 36 works well on a 250.
__________________
2011 EC250E
Reply With Quote
  #4  
Old 01-29-2018, 07:52 AM
jcs003 jcs003 is offline
Member
 
Join Date: Jan 2018
Posts: 45
Default

maybe the better question to ask is: what is the baseline jetting for a 36mm?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
36mm lectron Carb and other parts. VxZeroKnots Parts 8 06-21-2018 02:11 AM
36mm carb swap 2stroke Enduro Intake/Carburetion - 2 stroke 13 04-21-2016 09:45 AM
36mm carb Greenleaf13 "Wanted to Buy" & "Want To Trade" 3 06-21-2015 02:37 PM
Wanted #7 notched slide or a whole 36mm carb roverhybrids "Wanted to Buy" & "Want To Trade" 0 04-30-2013 07:38 PM
2011 250, 36mm jetting MrBlah Enduro Intake/Carburetion - 2 stroke 3 09-26-2011 07:53 PM




All times are GMT -5. The time now is 11:39 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org