Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 04-07-2018, 11:30 PM
Tomac's Avatar
Tomac Tomac is offline
Gold Level Site Supporter
 
Join Date: Jul 2016
Location: Melbourne Australia
Posts: 49
Default Part out. 07 EC 250 (Aus)

The bottom end has gone & the vibration has ovalized all of the engine mounts in the cases. I was going to do a full resto but I put a deposit on a Beta...

Its missing the side stand, overflow bottle & all of the ADR stuff
All prices are + post.

Frame is bent on the down tube. (probably going to be a wall ornament) make an offer???
Swing arm has a small gouge from the master cylinder bending in and rubbing 95% good. $50sold
Left and right cases have ovalized engine mounts from vibration but Id like to sell the complete bottom end with the gear box (gear box 100% good), clutch & ignition. $200 ono
Subframe about 90% straight. $120 sold
Kick start lever. $10 sold
Rear wheel complete with tire has a small crack (no sproket or disk rotor). $40 Sold
Front wheel (no Tire or disk rotor). $40 sold
Check point power valve cover. $40sold
250 cylinder. $100
Cylinder head. $50
Force radiator guards missing bolts. $30
Clutch lever, hose and slave. Sold
White front fender (09 shape). $20
48mm upper and lower tripe clamps. $40


New parts list:
GPI Radiators & red hoses in box. $80
TM Designs red chain slider & guide, never fitted. $100 for both
Rear white fender $30 sold

Near new:
Topline seat cover, black with red gripper stripes (complete seat) $80 sold
No Toil air filters x 2 $30sold
Twin air, air box wash cover $20sold

more updates to come


__________________
2017 Beta 300rr
2007 GasGas EC 250 (parting out)
2003 Kawasaki KLX 125 (wifes)

Last edited by Tomac; 08-14-2018 at 06:55 AM.
Reply With Quote


  #2  
Old 04-11-2018, 06:48 AM
jcs003 jcs003 is offline
Member
 
Join Date: Jan 2018
Posts: 45
Default

do you have a clutch master and slave cylinder? what condition is it in?

John
Reply With Quote
  #3  
Old 04-11-2018, 07:16 AM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

With those very reasonable prices your parts should sell quickly.
Reply With Quote
  #4  
Old 04-12-2018, 06:34 AM
Tomac's Avatar
Tomac Tomac is offline
Gold Level Site Supporter
 
Join Date: Jul 2016
Location: Melbourne Australia
Posts: 49
Default

Quote:
Originally Posted by jcs003 View Post
do you have a clutch master and slave cylinder? what condition is it in?

John
Yes. It in good working order. I removed the master cylinder quite awhile a go because I use a clake LHRB.

$20 for both plus post
__________________
2017 Beta 300rr
2007 GasGas EC 250 (parting out)
2003 Kawasaki KLX 125 (wifes)
Reply With Quote
  #5  
Old 04-12-2018, 06:37 AM
Tomac's Avatar
Tomac Tomac is offline
Gold Level Site Supporter
 
Join Date: Jul 2016
Location: Melbourne Australia
Posts: 49
Default

Quote:
Originally Posted by Zman View Post
With those very reasonable prices your parts should sell quickly.
Cheers Zman. I hope so, otherwise they will collect dust.
__________________
2017 Beta 300rr
2007 GasGas EC 250 (parting out)
2003 Kawasaki KLX 125 (wifes)
Reply With Quote
  #6  
Old 04-18-2018, 11:30 AM
jcs003 jcs003 is offline
Member
 
Join Date: Jan 2018
Posts: 45
Default

Quote:
Originally Posted by Tomac View Post
Yes. It in good working order. I removed the master cylinder quite awhile a go because I use a clake LHRB.

$20 for both plus post
send me your paypal info.

John
Reply With Quote
  #7  
Old 04-18-2018, 06:04 PM
Tomac's Avatar
Tomac Tomac is offline
Gold Level Site Supporter
 
Join Date: Jul 2016
Location: Melbourne Australia
Posts: 49
Default

PM me your name and address and I'll get you a total price. Cheers Matty
__________________
2017 Beta 300rr
2007 GasGas EC 250 (parting out)
2003 Kawasaki KLX 125 (wifes)
Reply With Quote
  #8  
Old 04-24-2018, 05:35 AM
Ozbushy Ozbushy is offline
Member
 
Join Date: Oct 2017
Posts: 4
Default Parts -

Hey Tomac, My EC250 is '06 (I think... 10th character of VIN is "G"). I'm looking f?r a straight exp. chamber and rear guard support loop. Anything there?
Reply With Quote
  #9  
Old 04-24-2018, 06:37 AM
Tomac's Avatar
Tomac Tomac is offline
Gold Level Site Supporter
 
Join Date: Jul 2016
Location: Melbourne Australia
Posts: 49
Default

I think the expansion chamber will fit but lm not 100% sure, if so its in very good condition. Rear guard loop??? Do you mean the sub frame?
__________________
2017 Beta 300rr
2007 GasGas EC 250 (parting out)
2003 Kawasaki KLX 125 (wifes)
Reply With Quote
  #10  
Old 04-26-2018, 07:07 AM
Ozbushy Ozbushy is offline
Member
 
Join Date: Oct 2017
Posts: 4
Default

Could you please post or pm me a cpl pics of pipe? Also, the guard loop I refer to is like a U shaped alloy tube which bolts to rear if subframe underneath rear guard. I assume it's there to support weight of taillight :-)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
part for ec 300 barbotte "Wanted to Buy" & "Want To Trade" 3 03-28-2018 06:20 PM
GG pro part to fit EC gassergrant Enduro Engine - 2 stroke 4 08-24-2012 03:35 PM
Part ID?? desertgasser300 Enduro Engine - 2 stroke 5 02-09-2012 09:04 AM
Fse Part , What is it , and where is it from ??? Gerko Enduro Engine 4 stroke (including EFI & Exhaust) 7 02-06-2011 07:12 PM
To part it or not? PEB General Discussions & Announcements 2 10-02-2008 05:03 PM




All times are GMT -5. The time now is 11:57 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org