|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Gas Gas EC300 2001 Supermoto maybe
would like to convert m 01 ec300 into a super moto does any one know what wheels fit to create this can make own caliper mount ect just need wheels or mounts if you can get them
|
#2
|
||||
|
||||
Do you intend this to be a permanent conversion?
If so, use your old wheel hubs and buy new 17" SuperMoto rims and spoke set. In my case. I wanted to be able to convert the bike back to Enduro. So I located a set of OEM AJP wheel hubs and had them laced to the new rims and spokes. So now I have both options. Swap the wheels and remove the SuperMoto caliper adapter bracket to go back to Enduro. I'll post some pictures in a couple weeks when I get the tires mounted and some details finalized. Good luck with your conversion. I think you are going to like how it rides. Jeff, So. Cal. |
#3
|
|||
|
|||
I used DRZ and KTM wheels. Also, there is a post on this site indicating that GG specs were sent to RAD in Utah and they will provide new wheels now.
Almost forgot. My Talon sprockets came in today and QTM included a flier indicating they provide Talon hubs with Excel wheels for the GasGas. www.QTMI.com Tony |
#4
|
||||
|
||||
Doh! Now you tell me. QTM is practically in my back yard.
I spent a small $$$ fortune getting my GG SuperMotard wheels set up. Not to mention all the driving around. Dealing with everybody, etc..etc.. Last time I talked to the folks @ QTM was at a SuperMoto National here in So. Cal. and they told me they did not have anything available for my GasGas. This was a couple years ago though. Oh well. I get the satisfaction of figuring it all out by myself. Just like Tony did. I assume they can fit the oversize, 320mm rotor and caliper adapter bracket to the different forks that come on GasGas? Ohlins, Marzocchi, Sachs, WP..... There'in may lie the problem. They did not know what bracket could work with my Marzocchi forks to the Brembo Caliper. Cheers, Jeff |
#5
|
||||
|
||||
Quote:
I've been thinking of doing a motard conversion on the 200 when I can get my motorcycle licence
__________________
Ben '03 GasGas EC200 My bike '89 Yamaha TT250 R.I.P - Lost in the Black Saturday Fires |
#6
|
|||
|
|||
Bearman.
My GG has the 25mm Shiver front forks so the only wheels that would be avail for the 25 would be the KTM or the Husky. I had 2 reasons for using the DRZ rear. But first, before I started all of this I had a DRZsm. So, before even beginning the project, I thought I would see if I could fit the DRZ wheel to the GasGas. I did get it to fit so I continued with the project. The DRZ rear will allow for a 36t rear sprocket. The other reason was that I had bought online 17" LC4 front and rear wheels. The rear wheel with its cush drive was put on my DRZ. It also would have fit the GG, but with its 5" wheel it would not have been as good a fit as the DRZ wheel was. The DRZ sm with the cush hub and its heavier weight makes for a perfect long distance bike. The rear axle of the GG is a 20mm axle and so are most other bikes so fitting the rear is more a matter of just finding something with similar sprocket to rotor distances. Tony |
#7
|
||||
|
||||
25mm forks? That seems very thin?
Thanks for the info, its a huge help for my future project
__________________
Ben '03 GasGas EC200 My bike '89 Yamaha TT250 R.I.P - Lost in the Black Saturday Fires |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ec300 coversion to supermoto | adickted | United Kingdom | 6 | 03-24-2010 07:48 PM |
Marchesini Supermoto Rims for EC300 | cheekeon | Enduro Chassis & Body | 1 | 04-17-2009 09:25 AM |
07 Plastics on 2001 ec300 | johns2394 | Enduro Chassis & Body | 5 | 04-04-2009 07:17 PM |
2001 Ec300 Does It Have A Top End? New To Gas Gas | MXR | Enduro Engine - 2 stroke | 12 | 06-06-2008 12:52 AM |