Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #21  
Old 01-24-2015, 03:03 AM
5valve 5valve is offline
Senior Member
 
Join Date: Dec 2014
Location: Slovenia
Posts: 181
Default

Recently bought used 2008 ec 300.
No mods, currently fixing neglects.
168 main
40 pilot
stock needle, 3rd clip
bike came with 13-48. Have two rides on the bike, One with 48, other with 52 rear.
48 ride was accompanied with unknowingly disconnected map switch, sun mode all along. It was tiring in slow speed and slippery long uphills were impossible.
Borrowed 52, which made transfer riding pretty high rpm-ish,bike reaches top rpm too fast, so torque rev wheelies with airborn gear changes were harder. Gnarly terrain was vastly improved, also with map switch now working, yet i'd like a compromise, so am considering 50 or 51.
Not a big help is my 2 stroke riding knowledge, especially steep slippery drive off, and a ajp master clutch in need of overhauling, waiting 4 parts.


Reply With Quote


  #22  
Old 04-22-2015, 12:40 PM
benj565 benj565 is offline
Member
 
Join Date: Jan 2015
Location: South Australia
Posts: 29
Default

Bike year: 2013
model: fantic tr250es (90% GG, if we're being honest)
mods: Jetting (N3CJ needle, 40pilot, 178main)
Gearing: 12/48
Top speed: 120kmh-ish?
what kind of riding do you do: Anything from sand whoops to hard enduro and enduro cross.

Same as 13/52. It was easier and cheaper to change the front sprocket, and less difference in chain adjustment from stock gearing (13/48). Nice and snappy.
Reply With Quote
  #23  
Old 02-05-2018, 12:59 AM
Gibnut Gibnut is offline
Member
 
Join Date: Jan 2018
Posts: 73
Default

Loving 13/50 on my 2018 EC250 Six Days. Lugs pretty much like a 300.

Mine came to Australia from the factory with 13/48, which is way too long for the snappy 250 motor.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
The Tire Thread - Please add your information noobi Enduro Chassis & Body 37 07-26-2021 12:17 AM
Looking for information to split case RayGas Enduro Engine - 2 stroke 2 05-26-2008 08:15 PM
Information please NewB GasGas Member Polls 3 10-25-2007 09:36 PM
2007 Model Information jeffd General Discussions & Announcements 8 08-27-2006 01:52 PM
FAQ Information Needed.... webmaster General Discussions & Announcements 0 08-02-2006 11:28 AM




All times are GMT -5. The time now is 10:03 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org