Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-28-2022, 06:07 AM
brider brider is offline
Member
 
Join Date: Nov 2011
Posts: 86
Default 2002 EC300 swingarm rubbing block replacement options?

Newbie here, bought a 2002 EC300 a while back and haven't done anything but ride it around the yard yet, but yesterday I inventoried all the things I need to do to "dial it in" before the first real ride.

I noticed the chain rubbing block on top of the swingarm at the front (pivot) end was missing, just a broken piece of rubber at the single attach screw on the top side.

I ASSUME this rubbing block wrapped around the front of the swingarm and also attached underneath.

Haven't researched OEM replacement sources yet, is this also available as an aftermarket part? Where?


Reply With Quote


  #2  
Old 09-28-2022, 01:16 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,000
Default

TM designs do one. Just fit one and It's as std
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #3  
Old 09-28-2022, 02:18 PM
brider brider is offline
Member
 
Join Date: Nov 2011
Posts: 86
Default will '21-'23 fit an '02?

I found this one @ TM Designworks, wondering how far off (if any) this is from fitting my '02?

https://www.tmdesignworks.com/p-2960...n-dcs-kt3.aspx
Reply With Quote
  #4  
Old 09-28-2022, 03:51 PM
brider brider is offline
Member
 
Join Date: Nov 2011
Posts: 86
Default

And do you have to remove the swingarm to install it?
Reply With Quote
  #5  
Old 09-28-2022, 05:21 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 697
Default

This is the one you need you must pick Rieju(GasGas)

https://www.tmdesignworks.com/p-145-...n-dcs-ggm.aspx

Yes it can be changed without removing the swingarm just remove chain and sprocket.
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas light switch block replacement. n_green Enduro Electrical & Wiring 6 01-28-2018 01:59 PM
2012 EC300 swingarm rubbing rear master cyl scorpa1 Enduro Chassis & Body 4 03-24-2014 10:13 PM
rear master cyl rubbing on swingarm? davermb Enduro Chassis & Body 5 07-02-2012 08:16 PM
Master Cylinder rubbing on swingarm Malcolm Enduro Chassis & Body 1 12-13-2009 12:36 PM
Stand Rubbing on Swingarm coolum74 Enduro Chassis & Body 14 06-16-2009 11:31 AM




All times are GMT -5. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org