Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2015, 10:59 PM
gorillam gorillam is offline
Member
 
Join Date: May 2015
Posts: 3
Default 2011 - EC250 - Exteme bogging WOT low rpm. Please help!

Steep hills my bike has no power once you have stopped or are lugging, sometimes when slipping the clutch revs go up and straight to a bog even at WOT.

It just bounces between slipping revs to bog with no power no missfiring, just 0 power at all. Quite frustrating.

In the mean time I will up the rear sproket to mask the problem until I can get a fix.

Bike is a 2011 ec250.

I just fixed the power valve tension issue/hitting case, that helped with low end power a lot, how-ever it made the bike's warmup a lot slower. Bike will miss during middle of the rev range until really warm (at least 5-6 minutes).

Please help.


Reply With Quote


  #2  
Old 06-01-2015, 01:21 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Jetting?
Reply With Quote
  #3  
Old 06-01-2015, 02:56 PM
gorillam gorillam is offline
Member
 
Join Date: May 2015
Posts: 3
Default

a talk with a local race shop they let me know that it was jetting, generally getting is pretty close I was not expecting the bike to be setup for sea level, we are 3500' + climbing.

Stupid mistake on my part, generally bikes I buy are pretty damn close
Reply With Quote
  #4  
Old 06-01-2015, 03:41 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Read and read some more.
Reply With Quote
  #5  
Old 06-04-2015, 01:07 PM
ecrider87 ecrider87 is offline
Member
 
Join Date: May 2015
Posts: 4
Default

Jetting and I went to a cck needle. Ive got a 2010 250 still has to warm for 4 or 5 minutes though.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
bogging past around 4500rpm. 06 EC300 stian Enduro Engine - 2 stroke 16 06-15-2015 03:15 PM
Bogging and top end Capz85 Enduro Intake/Carburetion - 2 stroke 14 04-05-2015 10:56 AM
GasGas 250 EC Bogging in tech and hill climbs BorrisDieBlokman Enduro Intake/Carburetion - 2 stroke 6 11-30-2014 03:03 AM
carb probs .bogging/ hesitation hippygary Enduro Intake/Carburetion - 2 stroke 4 09-12-2013 12:10 AM
03 GasGas 450FSE Bogging down, TPS value? ktownrider Enduro Engine 4 stroke (including EFI & Exhaust) 2 12-12-2007 10:34 PM




All times are GMT -5. The time now is 05:04 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org