|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
piston for my ec 200 same all years?
as the question said, can i fit a piston for an '04 ec 200 in my '01 ec 200?
i guess engine's haven't changed from '99 to about 2009, right? thanks guys. Hannes. |
#2
|
|||
|
|||
nobody knows about these ,apparently illusive, 200's?
i think i rmember all years pistons fit for the 300 and probably 250 allso then but for the 200? i need to order upcoming monday... thanks for any input here. ciao, Hannes. |
#3
|
|||
|
|||
http://www.ebay.com/itm/TOP-END-GASK...item1c2d6401cf
this auction on ebay states their piston kit fits from '98 thrue to '12... don't know how reliable this is though...it's a seller http://www.wiseco.com/ProductDetail....001&AppID=4986 Wiseco states that their pistons fit from '99 thrue to '11 in the 200. seems allready more reliable,right? nonetheless i'd like some confirmation from someone here thanks. |
#4
|
||||
|
||||
The last topend I did on my 200 I had the cylinder measured by my local engine machine shop, based from that info ordered a completed topend kit from Go.Fasters, which was Wiseco. I have put 3 topend in my 200 and have always used Wiseco complete topend kits. The last time I had the topend apart I did rings only, through Go.Fasters.
As far as I know, the 200 motor has NOT CHANGED since 99 when it first came out. Off the top of my head I am not sure if Wiseco offers a "A,B,C,D" sizes. Hope this helps.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#5
|
|||
|
|||
thanks for that,Rick :-)
i'll go for wossner since it's easier to order and beter priced then others. downside here at the "local" supplier is that they don't have a "B" piston on stock. hope an "A" will still do the trick then. don't know how long that piston has been in, for all i know it could be the very first one since it was made in 2001 i'm just replacing it for peace of mind since i plan on riding quite some what this year. ciao, Hannes. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is EC300 piston the same for all years? | jdosher | Enduro Engine - 2 stroke | 3 | 01-19-2013 05:38 PM |
50 years of kicks | GasGas | Pictures & Videos | 9 | 04-16-2012 03:12 PM |
The Ohlins Years | Jayhawk Ken | Enduro Suspension | 2 | 06-29-2009 08:28 AM |
pipes, early vs. later years | jostby | General Discussions & Announcements | 8 | 06-16-2009 08:07 PM |