|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Softer Clutch Springs
I am looking for softer clutch springs for my GasGas EC 300 2019.
If anyone knows a source please let me know. Thanks! Cheers Doc |
#2
|
||||
|
||||
Not got a solution for the springs Doc, but you can place shims under the spring hats to lower preload and help with the force.
Also a clake one light clutch is amazing for a nice light clutch. It is a little pricey though. But it is a keep forever and move to the next bike item.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#3
|
|||
|
|||
I have a 2021 reiju mr300 ,one finger clutch all day.I previously had a sherco and fitted a clake because of the ridiculous clutch pull. I would think the gasser and the reiju would have the same springs but might be worth a look .I do use auto trans fluid in my gear box .Type F as it has no friction modifiers .The reiju clutch is as light as the sherco was with the lake.I'm 64 and ride a lot of single track that requires a fair bit of clutch and I don't have any issues .Hands down the best clutch of any bike I have owned .Hope this helps
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch springs crossover EC300 2011 | Rampart | Enduro Engine - 2 stroke | 7 | 07-20-2019 10:33 AM |
Clutch springs | cladoo | Enduro Engine - 2 stroke | 5 | 05-07-2014 05:08 PM |
Clutch springs | jdosher | Enduro Engine - 2 stroke | 0 | 03-31-2011 02:04 PM |