Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-20-2010, 07:19 PM
whodat's Avatar
whodat whodat is offline
Gold Level Site Supporter
 
Join Date: Jul 2008
Location: arizona
Posts: 92
Default 2k3 stator with cdi from 2k2

is there a problen mixing the two?


Reply With Quote


  #2  
Old 11-20-2010, 08:12 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Nope CDI is the same. I have done the 2k2 to 2k3 swap btw.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #3  
Old 11-21-2010, 02:42 PM
whodat's Avatar
whodat whodat is offline
Gold Level Site Supporter
 
Join Date: Jul 2008
Location: arizona
Posts: 92
Default

thanks, I put a 2k3 in my bike and now it does not run past one-third throttle and I am stumped, that was the only change.
Reply With Quote
  #4  
Old 07-21-2013, 10:34 AM
Sierra Gasser Sierra Gasser is offline
Site Sponsor
 
Join Date: Aug 2006
Location: MINDEN NEVADA
Posts: 42
Default 2k2 to 2k3

There is a chance your power valve is not opening . I have seen guys go crazy trying to diag this type of problem & sell the bike because they didn't check it.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
stator crossover bronco-hunter Enduro Electrical & Wiring 2 12-14-2008 09:21 AM
stator rewinding mountain thumper Enduro Electrical & Wiring 10 09-28-2008 02:26 AM




All times are GMT -5. The time now is 07:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org