LTR power valve covers for GG2011

[Gary Hill]

I am looking for a LTR power vavlve cover for my 2011 GG300 and Les at LTR does not make them anymore. Does anyone know where I may be able to find one of these? I also am interested in some aftermarket "bling" for GG's does anyone here in the US make this type of product? Any suggetions would be greatly appreciated.



GHill

[blitz11]

Checkpoint-offroad has one:

http://checkpointoff-road.com/store.html

Scroll to the bottom.

[AZRickD]

I'll have one for sale once I get my 2012.

[swazi_matt]

Do they have a significant effect on the 300

[AZRickD]

I have it on my 250. Before I sell/part-out that bike, I might do some back-to-back comparisons with and without. Perhaps the same on the 2012 300E when I get it. I'm still considering removing the e-start, anyway.

[GMP]

Less on a 300 than a 250. It adds a little extreme lowed grunt to a 250. I have always run one even the original Tafta cover back before LTR, I see no negative, as once the PV opens its out of the equation. Its really good if the bike is set up with a midrange to top pipe.

[tetondrtbag]

Is there no way of adjusting the powervalves on 250/300's? I saw something on a bike, a gasser. TEC adjuster?

[thumperrider1]

I had a 2011 250 and now have the 2012 300. This 300 is pretty sweet! It does not have that heavy 300 feeling and is very similar feeling to my 250. No vibration issues either! Put a 50T on and ended up using an NEDJ needle, 42 pilot, and 172 main. Perfect combo for the tight stuff and will still rip on top. Bike does not get away from you with this combo.

I'm loving it.

[Jakobi]

Originally Posted by thumperrider1

I had a 2011 250 and now have the 2012 300. This 300 is pretty sweet! It does not have that heavy 300 feeling and is very similar feeling to my 250. No vibration issues either! Put a 50T on and ended up using an NEDJ needle, 42 pilot, and 172 main. Perfect combo for the tight stuff and will still rip on top. Bike does not get away from you with this combo.

I'm loving it.

Off topic: Which clip pos? Temp, elevation, RH?

On topic: I just had a good of the TEC and couldn't find anything. Well interested to know more about it. Where are you people seeing them? On stock 2012's? Just random pics?

[tetondrtbag]

I saw the T.E.C. power valve adjuster on TT? I don't know what bije it was on.
Provini is the manufacturer i think. The guy works for TM now. They make them for ; TM, KTM, GG, HUSKY,SUZUKI.
I saw an exchange rate, $425.00