|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Finally fixed front brakes
Well I've been messing around with the brakes for years. Rebuilt with new seals in caliper and master. New pins several pads and discs. Even bought a new line. Found a low mileage XR400 caliper to swap onto the GG carrier.
Every time made a small improvement. But like not marvellous. One night I had a rush of blood and bought a brand new Nissin Master cylinder off Ebay from Italy of all places. Tried it last weekend. Now it's great. I'm confident using 1 finger down steep downhills. I guess eventually the master wears a bit and a new sealkit doesn't address that. Must do the rear next. I had tried a Chinese CR copy but bore was different and needed bodge spacing brackets as hole were further away from body at the bottom..
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#2
|
||||
|
||||
Good job!
On my '01 XC 200, I ordered every part, front & rear including brake pads from a'01 Honda CR 250 oem online parts outlet. Brakes are excellent now. RB |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front Brakes | HoppyPoppy | Enduro Chassis & Body | 1 | 08-11-2017 09:54 PM |
front brakes | chchnick | Enduro Chassis & Body | 6 | 04-13-2015 05:31 AM |
Cant get all the air out of my front brakes | andykr87 | Enduro Chassis & Body | 20 | 09-12-2014 05:15 PM |
2011 zokes finally fixed(for real this time) | matt_tidball | Enduro Suspension | 4 | 12-08-2011 04:18 PM |
Grabby front brakes | rpduc | Enduro Chassis & Body | 11 | 05-28-2009 08:39 AM |