|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
2010 ec250
I am picking this bike up on Friday. Any advice, opinions, etc., anybody care to share about it? I also own a Gas Gas trials bike but it is much older.
Thanks! This pic is at the owners house, I'll get better ones once I get it home.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#2
|
||||
|
||||
congrats,and hello. Nice looking bike seems to just need a rider.
I'd check the water pump impeller.. guy's any thing else?? |
#3
|
|||
|
|||
that pipe looks so nice and clean, best fit a P3 guard on it if you riding rocks, and check the rollers on your chain guide if you have that type
__________________
2003 txt250 Pro 2013 Ossa 280i |
#4
|
||||
|
||||
I think the '10 GG with the black/red is one of the best looking years. Good luck and welcome to the forums.
Where are you located? |
#5
|
||||
|
||||
Looks like Pa ? I have the same bike, great bike!
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#6
|
||||
|
||||
Quote:
Thanks for the tips folks. I'll check those things out. I was already scoping out pipe guards .
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#7
|
||||
|
||||
Depending on what the previous owner had done, there are a few things you'd want to check/modify to improve the bike.
Engine wise - Squish adjustment. Stock clearances are huge. Someone like Mikes Cycle Playground or RB Mods will do a good job and be able to provide more info. Someone else suggested checking the clearance on the water pump cover. Probably not a bad idea to pull the RHS cover and check the PV tension at the same time. Once the heads setup the bike will be much easier to jet. Lots of recommendations but being a 2010 model you'll need to confirm which series carb is in it. Those sachs forks have a pretty harsh mid stroke spike which any decent tuner should be able to clear up for you. My 2010 model has racked up 260hrs/8000kms all without any issue and with nothing more than a bit of maintenance. Pistons every 80-100hrs. Like Fred said, great bikes! |
#8
|
||||
|
||||
The previous owner told me this:
"Mods are suspension setup for 210lb rider, head re-machined, guts seat." What he means by head re-machined I don't know exactly. I will ask him next time I see him.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#9
|
||||
|
||||
Sounds like its ready to ride
|
#10
|
||||
|
||||
Picked it up tonight. It's a friend of mine and he said he would wash it. This is his idea of clean LOL.
He gave me the stock seat foam/cover, the stock handguards, the manuals, and the Gas Gas fanny pack/tool pouch. Edit: Forgot it has radiator braces on it too.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010 ec250 | Fred1956 | Pictures & Videos | 7 | 11-05-2012 10:11 PM |
2010 ec250 jetting | BryanMcc | Enduro Intake/Carburetion - 2 stroke | 4 | 09-24-2012 06:00 AM |
2010 Gas Gas EC250 Six Days | cladoo | Enduro Product Announcements | 29 | 11-03-2010 05:09 AM |
2010 EC250 Jetting | WTEC | Enduro Intake/Carburetion - 2 stroke | 1 | 03-26-2010 09:41 AM |