|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Jetting for 2011 EC250 UK
Looking for a starting point for jetting on a 2011 ec250
38mm AS2 carb. I'm unsure on current jetting specs. Typical UK weather 6?c to 14?c. 0- 1000ft Thanks in advance. Looking for needle recommendation. Tight wooded trails with the a few hillclimbs. Thanks |
#2
|
|||
|
|||
Hi Quigs,
have you had a look at the jetting thread? I am sure you will find useful information there as most members post their personal settings there. Good Luck Steve |
#3
|
|||
|
|||
Hi Steve.
I been having a good look through the jetting threads etc. Looks like the NEDW suzuki needle could be a good starting point. Also recommended by jakobi. |
#4
|
|||
|
|||
Just checked my specs now and 're as follow.
PJ 40 AS 3/4 OUT NEEDLE, N1EF 2ND CLIP MJ 178 |
#5
|
||||
|
||||
Someone just posted a similar question, see it here...
http://www.gasgasrider.org/forum/showthread.php?t=23784 |
#6
|
|||
|
|||
Thanks Dave.
Ordered the NEDW now |
#7
|
|||
|
|||
Got the NEDW needle.
Thinking of starting at 42 pj, needle position 3, and a 178 mj |
#8
|
||||
|
||||
Sounds like a good starting place...hope it goes well.
|
#9
|
||||
|
||||
If you find clip 3 too rich,clip 2 too thin...options...
Necw is same taper,same diam,half clip pos leaner Necw#3 = Nedw#2.5 Was useful for the 200(Nech #3)but most 250s seem happy with Nedw#2
__________________
2013 ec200r Last edited by barossi73; 12-07-2018 at 09:44 PM. |
#10
|
||||
|
||||
Quote:
You might find these tables useful that relate to the Suzuki NE** needles: NE (1).JPG NE (2).JPG NE (3).JPG |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2011 EC250 - Need Some Jetting Advice | sneaky98gt | Enduro Intake/Carburetion - 2 stroke | 13 | 02-04-2018 03:57 PM |
'09 EC250 Jetting - Baseline help? | liv2day | Enduro Intake/Carburetion - 2 stroke | 35 | 01-29-2016 08:00 AM |
2011 ec250 jetting ????? | dinobody | Enduro Intake/Carburetion - 2 stroke | 9 | 04-23-2012 10:50 AM |
jetting for ec250 2011 six days | taku60 | Enduro Intake/Carburetion - 2 stroke | 2 | 02-01-2011 11:01 PM |
o3 ec250 jetting | dank | Enduro Intake/Carburetion - 2 stroke | 10 | 03-31-2010 01:17 PM |