|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
HOw do i go DC on my ec300
Trying to get MY AC system over to DC for HID lights.
How do i do it??? I called and email trailtech and they said they were unfimilar with GG stators .. I told them it was a 2K3 similar (MABYE the same?) as a ktm .. They seemed not to think so. SO who has done the DC mod on a gasgas??? and how?? |
#2
|
|||
|
|||
How much power is the HID ?
What voltage is the HID ? I'll have a look at the wiring diagram when I get home. Should be pretty simple. K
__________________
08 TXT 300 06 Gasgas EC200 03 Gasgas EC300 05 Pampera 250 |
#3
|
||||
|
||||
I think they are the same with the exception of the stator plate and timing. Basically you need to float the AC ground on the stator, and use both windings across the rectifier/regulator. Look at the trailtech instructions vs. your stator, should be obvious.
|
#4
|
||||
|
||||
I am right in the middle of this very modification. Converting a 2K3 Stator
I purchaced from a forum member. I looks exactly like the KTM 2K3 stator shown on their web site with the exception of the backing plate. The GasGas is round where as the KTM plate is trimmed. Here is one KTM stator that TrailTech sells: http://www.trailtech.net/S-8301-05.html ************************************************** ** This is the link you need: Here are the instructions on how to modify your stock stator: http://trailtech.net/media/electrica...conversion.pdf ************************************************** *** This an explination of the concept of AC to DC conversion: http://trailtech.net/media/electrica...y_concepts.pdf If you buy TrailTech's DC kit: http://www.trailtech.net/S-8301.html Insallation instructions: http://www.trailtech.net/media/instr...stallation.pdf Tech Support FAQ: http://www.trailtech.net/tech_support_stators.html Power provided by stock stator: http://www.trailtech.net/tech_support_ktm_stators.html --------------------------------------------------------- This from Baja Designs: http://www.bajadesigns.com/2005%20We...statormods.htm For KTM modifications: http://www.bajadesigns.com/2005%20We...ator%20Mod.pdf ---------------------------------------------------------- Hope this helps. Jeff |
#5
|
|||
|
|||
SO i wonder if i could buy the trailtech KTM dc stator they sell and put it in my gasgas???
|
#6
|
||||
|
||||
My guess would be yes. If the trailtech comes with a backing plate.
Just swap out yours. If not. Add your plate and install. Then get a battery and build a box or go the capaciter route. Here is the box I built out of some scrap Carbon Fiber from my work. --- here is the Yuasa 1.2 Ah battery I bought. http://www.batterywholesale.com/batt...tml?prodID=155 TrailTech and McMaster-Carr also sell similar batteries. ------- I would assume there are some real smart people on this forum that have gone through this learing curve before and are just sitting back watching us...... Good luck and let us know how your project comes out. I will post a report and some finished pictures when I complete mine. Cheers, Jeff So. Cal. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2005 EC300 vs 2007 EC300 | alecsstefan | Enduro Engine - 2 stroke | 19 | 01-22-2010 01:40 AM |