|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
09 EC 250 Oil level
I have a 2009 EC 250. First time I drained the tranny only about 350 mL ended up in the pan. Next time I changed the fluid I even tipped the bike on its side with the clutch cover removed. Put 350 mL in the hole and the oil shows at an acceptable level in the sight glass. I then run the bike on the stand through the gears, still at acceptable level in sight glass. 350mL seems lacking. Any suggestions?
|
#2
|
||||
|
||||
Quote:
The spec is 900ml, but many people use 1qt or 1L bottles, as thats simpler than having 5% full bottles everywhere. 350ml is most definitely too low |
#3
|
||||
|
||||
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Oil Level Plug ??? | grtpumpkin | Enduro Engine - 2 stroke | 4 | 08-28-2011 06:35 AM |
Float Level, please explain? | rod | Enduro Intake/Carburetion - 2 stroke | 13 | 02-12-2011 01:03 PM |
Zokes oil level? | jostby | Enduro Suspension | 2 | 06-20-2009 11:29 AM |
Fork oil level ? | Brian VT | Enduro Suspension | 4 | 03-10-2009 08:57 PM |
WP Fork Oil Level | MattR | Enduro Suspension | 11 | 08-02-2006 10:40 AM |