work table-elevated

[Cruiser]

I've been riding with them for a long time.. since the mid 90's. I have missed the last few Wallows tho.. AS far as front wheel clamp, unless you have a harley no.. you can improvise.. and if your handy or have a friend that welds make just about anything that you need. Dont forget to search Craiglist.. The handylifts are the best made ones. The harley guys evey now and then will sell one. One just went on CL in Philly a few weeks ago for $200 but I just did not have the cash on hand quick enough before someone else grabbed it up. If you know anybody that works at a golf course maintenance shop ask if they know anybody selling one. They all use these for the mowers and have really nice ones.. Every so often they build new shops(seams this year a lot are getting new shops) and if they get all new lifts they sell the old ones cheap..

[john r b]

Thanks Cruiser, I've looked on c/l no luck. Think I'll go w/ a new one.

[rgranger]

Smooth, I have a diamond plate and would like to replace it. dirt falls off the bike no matter how much you wash it before and the diamond pattern makes it difficult to clean. shoot, I may see about some plywood and paint it white. would make finding all those little parts that I lose easier to find!

[rgranger]

Say, sort of on topic, because I have the lift with the cruiser and diamond plate in one of those pictures. the zirk fittings are self threading and I busted a few, anyone know where to find some? I think they are like 4 or 5 mm? I don't mind buying a few to test and toss, I just don't want to have to buy 50 or 100 to see if they work

[john r b]

rgranger, try tractor supply i just picked some up there.

[rgranger]

Thanks John, there is one not far from the house, will give them a look!

[Cruiser]

Here is a very complete handy lift table in your area asking $800. He would most likely go lower. If you could get it for 6 or 7 it would be a good deal as these are the best made lift tables..
http://fredericksburg.craigslist.org...555071460.html

[Cruiser]

If you can find a wesco long scissors lift table like this,, put it in the middle of the shop pull the wheels and just make it your work station.. I have seen these sell for anywhere from $150-250 on CL.. good for 1000-1200 pounds.. goes 36" high too..