Shorty levers ?

[Jacob 'Berg]

Originally Posted by scratch250

A hacksaw and file do wonders. Free too if you have the tools already.

Right angle grinder with a cut-off wheel if you do not want to saw for 10 minutes. Just sayin...

[desertgasser300]

Originally Posted by poelinca

Next month i'll be in the market to buy some shorty levers.

What brands/models do you guys have on your bikes ? Thanks in advance

p.s. the bike is EC300 '14 model

Cut that knob off the end, like Jacob says with a grinder!!! That's the first thing to go on my new-ish bikes/levers.

P.S. Jacob, check your texts. What part of CO? And did you get that new bike yet??

[scratch250]

10 minutes! It's a 1/2" of soft ass aluminum. I don't even remove them, soft ass shit cuts like butter. Don't be a puss, just hack and smooth out with a file. Easy sleazy.

[jaysktms]

Zeta Levers have short ones.

[coopernicus]

I was able to successfully install on my 2014 300E the Moose shorty clutch lever as described in my prior post. Please note, I did not use the stock clutch adjustment screw as I was trying for a quick check. Instead, I used an S3 adjustment screw which has a larger head allowing it to be adjusted with fingers. This screw interfered with the large switch assembly requiring some additional adjustment. In sum: The Moose shorty clutch lever works, it is inexpensive, and only requires a little adjustment if you are using an S3 adjustment screw. Good luck finding the lever in Europe! If you do, you will be happy!

Eric

[poelinca]

Originally Posted by coopernicus

I was able to successfully install on my 2014 300E the Moose shorty clutch lever as described in my prior post. Please note, I did not use the stock clutch adjustment screw as I was trying for a quick check. Instead, I used an S3 adjustment screw which has a larger head allowing it to be adjusted with fingers. This screw interfered with the large switch assembly requiring some additional adjustment. In sum: The Moose shorty clutch lever works, it is inexpensive, and only requires a little adjustment if you are using an S3 adjustment screw. Good luck finding the lever in Europe! If you do, you will be happy!

Eric

This is great news! Thanks a million, too bad you are half way across the globe ... it will be impossible to reward you with a couple of cold beers.

[memphis2857]

I have a stock AJP clutch lever that came with my bike. Not sure why GasGas would send an AJP spare when my bike has a Brembo clutch. If someone needs it I would be glad to sell it for close to the cost of a replacement Brembo for my bike


Sent from my iPad using Tapatalk

[95jersey]

I have a shorty lever from the trials bike. Bolts right up pm me