Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #41  
Old 12-15-2019, 11:48 AM
Doc Brown Doc Brown is offline
Senior Member
 
Join Date: Dec 2017
Location: Austria, Europe
Posts: 586
Default

For those who are interested, that is what I found when I opened the engine today:

Although the dealer said he has replaced the nut I found the OEM nut without the cuts in its edges. No Loctite.




And that'ts the nut I fitted with Loctite and torqued to 80NM




Blocking the gears between clutch and crank with a 5 Eurocent coin worked very well. The coin was bent afterwards :-)


Reply With Quote


  #42  
Old 09-27-2021, 05:42 AM
Chugga Chugga is offline
Member
 
Join Date: Sep 2021
Posts: 5
Default Require new nut

Hi all, I have just purchased a low hours, 18 only EC300 2019. Looking at my VIN, my bike falls into the replacement category. What?s interesting is the recall says bikes up to 28th December 2018. My bike is plated 01/19, but I guess that production could have been in December. I?m trying to locate a nut in Australia, anyone have a good dealer to use? Or I?ll order from Europe. Anyone know of this actually failing or was it a precaution? Thanks
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
KYB technical touch USA website GG221 Enduro Suspension 0 06-14-2019 08:03 PM
Post your hard technical trails here hawaiidirtrider Pictures & Videos 29 05-11-2013 12:07 AM
Please use the Technical Forums for specific questions MattR General Discussions & Announcements 1 01-14-2008 07:24 PM
Website/bulletin board downtime possible. webmaster General Discussions & Announcements 0 12-14-2006 03:56 PM
Bulletin Board Upgrade... webmaster General Discussions & Announcements 0 08-27-2006 09:46 PM




All times are GMT -5. The time now is 03:16 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org