Sachs T clamp dia

[GMP]

Guys with Sachs bikes, what is the dia of the upper and lower clamp areas of the fork? While I'm at it, are the new '11 Zokes the same and use the same clamps as the '04 - '08 Zokes? Thanks.

[Zeal]

2010 with 48mm Sachs, and 2008 with 45mm Marzochi have the same triple clamps.

Enjoy.

[GMP]

Thanks. So your saying that the lower clamp dia on both forks is the same dia? The '07 Zokes/lower clamps are 57mm, are the newer Zokes and Sachs larger then? 57mm seems VERY small for a 48mm fork.

[Neil E.]

The 2011 XC 45 Zokes are 54 on the upper clamp and 57 on the lower clamp.

[GMP]

I thought so, same as '07. I would have thought the Sachs to be larger, anyone else?

[gassi]

I think it could be 59,3mm...
I have some sachs fork files with specs, but they are too big to upload here.
It's maybe from '09 sachs and it says that the upper clamp area diameter is 54mm and the lower clamp area diameter is 59,3mm.

[GMP]

That sounds more like it for a 48mm fork.

[ScottyR]

The lower clamp is bigger on the Sachs forks bikes. Top is the same.

[gassi]

There is old topic about this: http://www.gasgasrider.org/forum/sho...ght=sachs+fork