|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
I had a 90 Yamaha WRA250 that belonged to Allan Roach, of Baja Designs fame that was street legal. MT 21's front and rear and a heavy Moose flywheel....it was so much fun it should have been outlawed...enjoy
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#12
|
|||
|
|||
My '98 EC250 with the c/b motor and stock Messico pipe was super smooth. With the right gearing it was perfect for tight, gnarly trails. The stock pipe couldn't take much abuse and even with an c/f pipe guard it didn't take long to look like an empty Budweiser can at a frat party. I put a Motowest pipe on the bike which really perked up the low-end power. There were times I really missed the smooth power delivery of the Messico pipe, but the Motowest pipe was much more dent resistent.
|
#13
|
|||
|
|||
so the rear fender will fit an 06 ec200? and what year yzfront fenders work? i know the crossover list says 02 onwards but when looking at fenders i find all sorts of options such as 00-05, 00-03 but no 02 onwards. cheers for all the help
|
#14
|
|||
|
|||
The rear should fit as I have one on my 02 with 06 side pannels. I have always had to drill new holes to get a non gg front to work so ant year would probably work. The Kx stuff goes for cheap on Ebay.
|
#15
|
|||
|
|||
does the kx rear fender have the mounting holes for the cdi?? because ive just took my rear fender off and realised the cdi is mounted onto the back of the fender
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Old to new plastics | fastfilli | Enduro Chassis & Body | 2 | 01-24-2010 09:04 AM |
gas gas plastics | randy | General Discussions & Announcements | 2 | 11-07-2009 02:41 PM |
99 - 02 KX plastics on GG 05 | brains | Enduro Chassis & Body | 7 | 01-03-2009 04:19 PM |
gas gas plastics | johns2394 | Enduro Chassis & Body | 1 | 12-09-2008 06:44 AM |
Where to get plastics 98 EC - UK | jazzy | Enduro Chassis & Body | 0 | 09-24-2008 04:43 AM |