|
|
|||||||
| Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
|
Thread Tools | Display Modes |
|
#14
04-04-2013, 03:07 PM
|
||||
|
||||
Thing with these is there are no parts easy to get. You can get to the rebound piston and reinstall it with no special tools but some care is involved. When the rebound clicker assy and locknut are free from the bottom of the damper rod, clean, tape, and greasing the threads allow it to be pushed up past the seal without damage and removed from the cartridge. Same for reassembly, but retain the rebound piston ring on the piston with an oring and push the assembly into the cartridge with a 10mm "T" handle.
Sent from my iPad using Tapatalk HD 
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Marzocchi 48mm CC Forks | SolidPerformance | Enduro Suspension | 334 | 01-08-2019 07:32 AM |
| Marzocchi 48mm 2nd service | GMP | Enduro Suspension | 1 | 02-04-2013 04:16 PM |
| 48mm Marzocchi warning! | STM Suspension | Enduro Suspension | 17 | 03-22-2012 03:44 PM |
| new 48mm Marzocchi forks?? | Dave A | Enduro Suspension | 19 | 11-04-2011 07:48 PM |
| Marzocchi 45 stock shims | vavido | Enduro Suspension | 2 | 05-28-2008 04:31 PM |
Threaded Mode