GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-27-2013, 08:09 AM
ECTim ECTim is offline
Member
 
Join Date: Nov 2013
Posts: 29
Default Airbox and gaskets

Been tinkering with my "new-to-me" ride ('06 EC300) and noticed the airbox is relatively useless with regards to keeping water/mud out. Did a quick search and found some use foam etc. in there but is that best? Thinking that woudl reduce air volume. Any suggestions?

Also, I'm going to inspect the clutch and put a new powervalve cover and billet waterpump impeller on from GoFasters. Is this bike all orings or paper gaskets and has anyone found a complete engine set from Cometic or the like?

TIA!!


Reply With Quote


  #2  
Old 11-27-2013, 02:50 PM
JP4's Avatar
JP4 JP4 is offline
Senior Member
 
Join Date: Nov 2010
Location: Ontario, Canada
Posts: 251
Default

I found this top-end kit a while back, but have not purchased from this seller before. Search their site as they also sell bottom-end and other gasket kits.

http://www.powersportsplace.com/part...00?prefilter=1
Reply With Quote
  #3  
Old 11-27-2013, 04:16 PM
ECTim ECTim is offline
Member
 
Join Date: Nov 2013
Posts: 29
Default

Sweet, thanks! I'll let y'all know if I get screwed over by them or not! ;-)
Reply With Quote
  #4  
Old 11-27-2013, 04:31 PM
nknudsen's Avatar
nknudsen nknudsen is offline
Senior Member
 
Join Date: Oct 2012
Location: SE Minnesnowta
Posts: 719
Default

Quote:
Originally Posted by ECTim View Post
Sweet, thanks! I'll let y'all know if I get screwed over by them or not! ;-)
I doubt you'll get screwed over by them. It's the power sports division of Summit Racing. I've been ordering race car stuff from them since the early 90's and I've never had an issue.
__________________
Noah
2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title
16' Ski-Doo XS Renegade X 1200 4T
16' Specialized Fatboy trail
02' ZRX 1200r R.I.P.
72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been)
15' TW200
Reply With Quote
  #5  
Old 11-27-2013, 04:51 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

My favorite go-to parts supplier in the US is Bob Piper at North Tahoe Motorsports. Great to deal with, LOTS of technical knowledge, and I think everything is in stock. If it isn't on the page, email Bob and he'll get you a price. Great guy, he really helped me when I rebuilt my 2002 XC300.
__________________
Phil
(New bike pending...)
Reply With Quote
  #6  
Old 11-27-2013, 05:25 PM
ECTim ECTim is offline
Member
 
Join Date: Nov 2013
Posts: 29
Default

Thanks guys. Any opinions either way on Cometic vs. OEM gaskets?
Reply With Quote
  #7  
Old 11-27-2013, 10:29 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 554
Default gaskets

Last complete gasket set I bought was from gofasters
Complete set I dont think it was too much cause i'm a cheap / frugal SOB
I'd check with them and they get stuff to you pretty quick,also there are some on ebay from international sellers
But i'd trust gofasters 1st

Last edited by Stoby; 11-27-2013 at 10:29 PM. Reason: spellin
Reply With Quote
  #8  
Old 11-28-2013, 07:00 PM
ECTim ECTim is offline
Member
 
Join Date: Nov 2013
Posts: 29
Default

Ok, will do, thanks!
Reply With Quote
  #9  
Old 11-29-2013, 06:12 PM
ECTim ECTim is offline
Member
 
Join Date: Nov 2013
Posts: 29
Default

Picked up some gaskets and other things at GoFasters. Thanks for the heads-up.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gaskets? Harry Enduro Engine - 2 stroke 6 11-17-2011 11:50 AM
How to make gaskets Rabbitist Enduro Engine - 2 stroke 5 09-17-2011 07:46 PM
base gaskets Gassey fan Enduro Intake/Carburetion - 2 stroke 2 04-29-2010 08:55 PM
Base Gaskets Warwick Simpson Enduro Engine - 2 stroke 16 05-23-2009 08:16 PM
125 gaskets noobi Enduro Engine - 2 stroke 0 04-23-2009 05:08 PM




All times are GMT -5. The time now is 11:10 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org