GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 08-17-2021, 09:00 PM
Mannmitch97 Mannmitch97 is offline
Member
 
Join Date: Aug 2021
Posts: 2
Default 2005 EC 450 FSE Slipper Clutch Basket Wobble

Hey guys,

I recently picked up an 05 450 fse with the Adler slipper clutch. Upon inspection, I noticed the clutch basket has a noticeable amount of play in it when twisted like you would check a car wheel. As in pushing at 12 o'clock and pulling at 6 o'clock, and vice versa.

Is this normal? The play is definitely between the basket and the gearset as if the rivets are alittle too loose, not the needle bearings or races. I know some clutches have rubber dampers between the basket and backing plate, but not sure if this does and couldn't find any info on it. I've linked a video showing the movement. The wobble was the same when the clutch is fully put together.

If anyone else is taking one of these apart and doesn't have the special "assembly tools" specified in the shop manual, 3x 5mm x .8 x 45mm screws with washers will do the trick. Also, the main clutch nut takes a 30mm socket.

Thanks for the help!


Link to video: https://photos.app.goo.gl/QAYsQbLMyfVD4zjS6
Attached Images
File Type: jpg 0812211730b.jpg (104.1 KB, 8 views)
File Type: jpg 0812211730a.jpg (125.3 KB, 6 views)


Reply With Quote


  #2  
Old 08-17-2021, 09:18 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,482
Default

Welcome to the site.

The internal dampeners are getting loose.
Doesn't look too bad.
Reply With Quote
  #3  
Old 08-20-2021, 12:35 PM
Mannmitch97 Mannmitch97 is offline
Member
 
Join Date: Aug 2021
Posts: 2
Default

Thanks for the quick reply.

Do you know if anyone sells just the dampers? Or is that only on aftermarket baskets?

I have no problem drilling out the rivets and tapping the backing plate for screws on the stock basket, but haven't been able to find replacement dampers.
Reply With Quote
  #4  
Old 08-20-2021, 09:24 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 621
Default

I thought they were available genuine, pretty sure I have seen Hinson or similar replacement ones in the past too. The last time I did it was a while ago.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
Reply

Tags
450, basket, clutch, fse, slipper



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch Basket and plate thickness - 250 2T 2005 bally123 Enduro Engine - 2 stroke 0 01-18-2016 02:59 PM
Auto clutch Install, Rekluse or S3 Clutch Basket? Moto7man General Discussions & Announcements 49 11-24-2013 12:41 AM
Slipper Clutch...Where can I buy one from??? drzdemon Enduro Engine 4 stroke (including EFI & Exhaust) 11 11-30-2008 04:27 PM
Slipper clutch or not? Qui-gon General Discussions & Announcements 11 04-08-2008 04:48 PM




All times are GMT -5. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org