GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 10-21-2009, 07:45 PM
Metalefty's Avatar
Metalefty Metalefty is offline
Senior Member
 
Join Date: Aug 2006
Location: Rocky Mountains
Posts: 160
Default Leaking fuel lines.

OK, so this past Sunday I go riding with two guys I've never ridden with before. As soon as I gas it to leave the truck the bike stalls and gas is spewing all over the top of the engine. I notice the fuel line leaking beside the band clamp at the injector, I said to the guys, go for a half an hour loop and I'll be ready. So I find two small leaks at the band clamp, cut it a little shorter, reattach, I'm tightening the last screw and the two guys come back and I'm ready to ride. Four miles into the ride my bike stalls and gas is spewing all over my engine, now there are two new leaks in the middle of my fuel line, no fixing it this time, I'm done. An hour and a half of towing, a huge thank you, a couple of beers and I'm out of there. I'm sure now that there are two guys who don't think much of GasGas...lol. Anyways, my dealer says that to replace the two lines on either side of the quick disconnect I have to buy a kit that cost about $100. Have any of you been able to buy just the lines?


__________________
'05 EC450FSE
'02 MC250
Reply With Quote


  #2  
Old 10-26-2009, 07:30 PM
gasit16 gasit16 is offline
Senior Member
 
Join Date: Jan 2007
Location: Melbourne Beach Fl
Posts: 132
Default fuel lines

I bought a set of lines from Go Fasters then put some tape on the lines were they hit the frame.
Reply With Quote
  #3  
Old 10-27-2009, 05:19 PM
Metalefty's Avatar
Metalefty Metalefty is offline
Senior Member
 
Join Date: Aug 2006
Location: Rocky Mountains
Posts: 160
Default

Quote:
Originally Posted by gasit16 View Post
I bought a set of lines from Go Fasters then put some tape on the lines were they hit the frame.
How much were the lines?
Mine didn't rub through to cause a leak, I believe they just dry rotted, the leaks were in various places.
__________________
'05 EC450FSE
'02 MC250
Reply With Quote
  #4  
Old 10-27-2009, 07:24 PM
gasit16 gasit16 is offline
Senior Member
 
Join Date: Jan 2007
Location: Melbourne Beach Fl
Posts: 132
Default

I can not remember how much thy were but you can call Go Fasters. I think they are around $80.00.
Reply With Quote
  #5  
Old 10-28-2009, 07:08 PM
Metalefty's Avatar
Metalefty Metalefty is offline
Senior Member
 
Join Date: Aug 2006
Location: Rocky Mountains
Posts: 160
Default

I've already got the kit, I just thought it sucked that I couldn't get the lines only and had to get the kit with the throttle body connection,quick disconnect, fuel pump connection which were still in good shape. I'm pretty sure my dealer ordered them from GoFasters. Either way, the parts shipped in 4 days and I was up and running by the following weekend, another example of Gasser parts being shipped quickly when riders on other brands think Gasser parts are hard to get...
__________________
'05 EC450FSE
'02 MC250
Reply With Quote
  #6  
Old 10-28-2009, 09:50 PM
gasit16 gasit16 is offline
Senior Member
 
Join Date: Jan 2007
Location: Melbourne Beach Fl
Posts: 132
Default

A frend of mine is still wating for yam parts.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuel Leaking Stef Enduro Intake/Carburetion - 2 stroke 9 10-27-2010 07:51 AM
check your vent lines... stainlesscycle Enduro Chassis & Body 1 05-18-2010 03:54 AM
Fuel lines - Inside or outside of frame? lukemillar Enduro Engine 4 stroke (including EFI & Exhaust) 6 09-09-2009 04:57 PM
Cylinder gasket leaking. GavGav Enduro Engine 4 stroke (including EFI & Exhaust) 2 05-18-2009 01:25 PM
power valve vent lines skid jackson Enduro Engine - 2 stroke 2 06-16-2008 06:15 PM




All times are GMT -5. The time now is 11:28 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org