GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 12-27-2012, 05:08 PM
wmcpb04 wmcpb04 is offline
Member
 
Join Date: Feb 2012
Location: Birmingham UK
Posts: 20
Default Settings

Trying to get my suspension sorted on 99 gasser ec250. After riding it a few times the front wanted to wash out all the time so I checked the suspension settings.

I have adjusted the front forks (conventional type) back to factory setting and after checking the rear the spring had no preload so I added 13mm of preload this means the static sag is now 46mm and race sag is 116mm.

My question is do keep uping the preload to get the static sag closer to 30mm and what is the maximum preload limit.

I'm new to dirt bikes, so slow but I would rather start with bike set up properly but not as full racer. Thanks Chris


Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
sag settings.... BryanMcc Enduro Suspension 12 09-04-2012 10:04 AM
EC 250 05 noo idle. settings?? Laban1234 Enduro Intake/Carburetion - 2 stroke 5 07-21-2009 12:13 PM
02 ec 200 stock settings Airborne Enduro Suspension 0 06-24-2007 08:49 AM
03 ec 200 stock settings? Airborne Enduro Intake/Carburetion - 2 stroke 0 06-24-2007 08:45 AM
best settings for sand catch22 Enduro Suspension 10 09-08-2006 12:26 PM




All times are GMT -5. The time now is 11:19 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org