|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
01 xc200 fork comp valve broken
Merry Chrismas everyone.
I just put new seals in my forks and found the comp adjuster assembly at the bottom of the fork loose. I consulted the WP assembly manual and attempted to tighten it first with a ratchet which didn't work. So then I tried an impact driver(not the smack-it-with-a-hammer kind). I held the damper rod at an angle to hold the inner part but it wouldn't snug up. It just kept spinning. Using the impact, I broke it at the land where it seats on the copper sealing washer. What can I do now? I took it out and I can see that it wont do it's job with that little lip broken off. Any suggestions for where to get a replacement? used? or cheap Thanks
__________________
fasternat |
#2
|
||||
|
||||
Believe it or not the best resource for WP parts is most likely your local KTM dealer as nobody (at least up until recently unless something has changed) is importing WP parts into the US other than KTM as they use WP suspension products on the bikes.
__________________
Steve Berkner I've attended 21 Six Days as a working Photojournalist |
#3
|
|||
|
|||
hey thanks for the reply berky boy.
i was hoping to find a used piece for cheap but i guess i'll do what i gotta do. does anyone know, will replacing the o-ring and/or the copper washer aid in getting the comp holder tight? Is it normal to be able to turn the comp holder and tube easily(with a socket) when you've "tightened"it?
__________________
fasternat |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another satisfied LTR fork re-valve customer | super_rat | Enduro Suspension | 0 | 03-11-2010 08:38 PM |
Pull base valve without fork teardown? | bergerhag | Enduro Suspension | 7 | 05-03-2009 05:24 PM |
Broken fork springs...anyone see that before? | stvbird | Enduro Suspension | 2 | 03-20-2008 06:20 PM |
correct jetting for my 01 xc200 ? | fasternat | Enduro Intake/Carburetion - 2 stroke | 4 | 02-28-2007 12:19 PM |
ignition comp. | asistech | Enduro Electrical & Wiring | 2 | 07-24-2006 12:15 PM |