#1
|
|||
|
|||
Where , chain + sprockets
Where you chaps buy your chain and sprockets.
Also it's got a 48 on the rear, seems to ride all rite as I only do green laneing.. From memo is 52 the norm |
#2
|
||||
|
||||
Ebay is your friend
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic. Now a 250cc. |
#3
|
|||
|
|||
If you want a 14t front, talon or renthal seem to be the only brands.
Never go cheap with a chain unless you get a good tensile strength measurement (from a retailer you can trust). www.wemoto.com sell a high tensile chain (higher than DID!) for very cheap http://www.wemoto.com/components/Cha...520ihsv-o-124/ you will have to remove a couple links thought
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#4
|
||||
|
||||
Anyone using a regina chain? I don't know much about chains but I was told it was good. iv been running it a while now with no issues. . but iv never really had issues with any chains iv used.. Rk, renthal
|
#5
|
|||
|
|||
Regina are good, once again, go O-ring minimum.
Donghua are also a good make. Just make sure you never ever go cheap, I bought a chain 'heavy-duty' chain for my old DR650 (back when I was a poor teenager), took a week to snap and take out the left hand engine cover
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#6
|
|||
|
|||
http://www.24mx.co.uk/mx-twenty-delt...0-x-ring-chain
or with sprockets http://www.24mx.co.uk/mx-twenty-delt...d-sprocket-kit used this one on my previous bike (kdx 200) seemed good for the time I had it but I ended up selling the bike after a few months after putting it on so cant comment on the life of it. I will probably go for this again when my 250 needs a new one |
#7
|
|||
|
|||
Cheers chaps
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sprockets | knobbyboy | Enduro Chassis & Body | 2 | 09-11-2014 08:17 PM |
Chain and sprockets | Rabbitist | Enduro Chassis & Body | 4 | 06-12-2011 08:31 AM |
Chain and Sprockets | Rick | Enduro Chassis & Body | 5 | 01-12-2010 11:35 AM |
chain slider / chain guide crossover? | bondo | General Discussions & Announcements | 1 | 09-01-2008 09:13 PM |
sprockets and chain | quadinfamily | Other GasGas Bikes/Quads | 1 | 04-06-2007 08:52 PM |