#1
|
||||
|
||||
Parting out '07 300 EC
Right after I spent serious $ freshening up this bike, I found out that it needs a total bottom-end rebuild (isn't that the way it always goes with dirt bikes?). That's more $ than I want to put in an '07, so I am going to part out the major parts. I'm not planning to mess with the smaller stuff, but if there is anything particular that you need, let me know & we'll work something out. I haven't figured out how to post pictures, but I can email them. For sales or shipments out side the continental US--contact me & we'll work something out. I'm in US zip code 38017. All prices are OBO, I just need to clear the clutter in my garage.
*This 1 has the small ignition, so I added a flywheel weight. 1. Twin Air aluminum filter cage w/brand-new filter element: Lists for $149.95, I'll sell for $85 shipped in con US. Cage is as-new, filter is new in the bag from Gofasters. 2. Rekluse clutch basket: This stops the grinding & squealing that the stock clutch always did. I used it for 3 rides, a total of a few hours. I'll sell it installed with the backing plate/gear that it bolts up to. Lists new for $249, I'll sell for $169, shipped in con US. 3. Moose Off-road clutch kit, with springs & plates, both steels & fibers. These have the same few hours on them as the basket, they are as-new. Dennis Kirk lists them for $229.95, I'll sell for $169, shipped in con US. 4. 300 cylinder, head & piston: These are in fine shape. The bore is bright & shiny with no gouges, chips or scrapes in the finish. Piston is fine. There is just the beginning of a little blow-by on the piston, so it will need new rings. $300. 5. Bottom end: No clutch, see above. It needs to have the bearings, seals & gaskets replaced. I'll sell for $100 + actual shipping, or work out a package deal for the top & bottom. 6. Wheels: In excellent shape. Front wheel bearings have an enduro & 3 or so rides on them. Rears have just a couple of rides. I'll ship with rotors attached. I don't know what they are worth; make an offer. 7. Nissin brakes: In excellent shape. Front pads have 1 enduro & about 3 rides on them, the rears another ride or 2 than that. Make an offer if interested. 8. Sachs rear shock: Re-valved & re-sprung by LTR for a 200-lb. fast B-level rider. It's a terrific shock. $300 + shipping? Or make offer. Stock spring included. 9. Marzocchi 45mm fork: Re-valved & re-spring by LTR as above. Works great. $300 + shipping? Or make offer. Stock spring included. 10. FMF Turbine Core II spark arrestor/silencer. In OK shape & never failed a sound test but I am sure it could use a re-pack. $50 + shipping. 11. Controls? Electrics? Seat base & stock foam? Frame? Sub frame? Swing arm? Etc? If anyone is interested in these, please let me know & I will pull them, get some photos, & work out a deal with you. Thanks John |
#2
|
|||
|
|||
PM sent about clutch basket!
|
#3
|
||||
|
||||
Forgot about the YZ kick starter: $30 shipped in con US.
|
#4
|
|||
|
|||
I will take the kickstarter...plus I will look through the rest of the post.
|
#5
|
||||
|
||||
OK, kickstarter is sold.
|
#6
|
|||
|
|||
Do you have the kickstand assembly?
__________________
'05 EC 300 |
#7
|
||||
|
||||
Wheels are sold.
|
#8
|
||||
|
||||
Indeed I do, in good working order. how about $35 shipped in con US?
|
#9
|
|||
|
|||
Sounds good to me.
__________________
'05 EC 300 |
#10
|
||||
|
||||
pm sent on subframe etc
__________________
Old GGs: 01 XC300, 02 XC125, 03 DE300, 03 DEO200, 01 SE300, 2011 EC300 Current: 05 DE250, Showa forked frankenbike 300, 05 DE300, 19 YZ250X |
|
|