|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
48 mazzers air bleed question
when i open the vent screws on the top i hear no air escaping , on my wp forks i could always hear a hissing as the air escaped ,is this normal on the mazzers ?
|
#2
|
||||
|
||||
The WP Bladder forks are masters of building up air pressure.
I always get a little bit of air come out of the TTX carts in the Sachs, and my 48mm Zokes. Nothing crazy though. Just a quick psst. |
#3
|
|||
|
|||
i am not even getting that , does that just mean the zoke is better at not builing up air pressure ?
|
#4
|
||||
|
||||
Yes! More consistent feeling thru the ride.
__________________
www.endurohp.eng.br Sherco ST300 2015 (Trials) https://www.instagram.com/leocm74/ Brasil! |
#5
|
||||
|
||||
I never get any pressure build up on the zokes. stopped worrying about it. My wp forks need to be bled about every 10 minutes of ride time.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#6
|
|||
|
|||
It's normal. Never had a set of forks that build up so little air .
__________________
Vindicator '11 EC 300R |
#7
|
|||
|
|||
I had speed bleeders on my 48's, but removed them because of the lack of air build up.
Sent from my SGH-T999L using Tapatalk |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Zoke 48 bleed screw thread | GMP | Enduro Suspension | 6 | 04-26-2012 02:07 PM |
please help....can't bleed clutch | Zhack | Enduro Engine - 2 stroke | 2 | 10-12-2011 12:09 PM |
how to bleed clutch | austin.s24 | Enduro Engine - 2 stroke | 4 | 09-17-2011 11:14 AM |
clutch bleed screw | Oldcow | General Discussions & Announcements | 2 | 07-19-2008 06:01 AM |
How do I bleed my clutch? | lukachuki | Enduro Engine - 2 stroke | 3 | 09-24-2007 02:53 PM |