Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-21-2007, 07:01 AM
Gas Stu Gas Stu is offline
Member
 
Join Date: Aug 2007
Posts: 10
Default Carb Question

Hi gents, I have an 02 Ec 250. just changed jets from 38 pilot to 40, and 168 main to 170. Its runs way better but now battles to start when cold.Once it fires up it idles very high. What could it be. Air screw is almost 2 turns. Starts first kick when warm.....whats up here


Reply With Quote


  #2  
Old 08-21-2007, 02:19 PM
rider01 rider01 is offline
Member
 
Join Date: Aug 2007
Location: Northwest Arkansas
Posts: 50
Default

It sounds lean on the bottom , try taking the air screw in about a turn while it's idling & see if it slows the idle.
Reply With Quote
  #3  
Old 08-22-2007, 04:33 AM
Gas Stu Gas Stu is offline
Member
 
Join Date: Aug 2007
Posts: 10
Default

Thanks rider01, will try it out, cheers
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone fitted a carb? & starter clutch question sgoaty Enduro Engine 4 stroke (including EFI & Exhaust) 5 05-25-2011 05:02 AM
2010 carb question GG27 Enduro Intake/Carburetion - 2 stroke 13 12-14-2009 11:42 AM
RB carb spdfrek Enduro Engine - 2 stroke 2 03-22-2008 10:28 PM
Carb set up please help thingymijig Enduro Intake/Carburetion - 2 stroke 2 02-24-2007 01:55 PM




All times are GMT -5. The time now is 11:40 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org