|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
45mm marzocchi adjusters
Anybody had trouble getting the preload adjusters to move on 45mm marzocchis? Mine seem to be wound in to max preload and I can't get them to move either way are they knackered or am I missing something?
|
#2
|
||||
|
||||
Usually they are jammed up from some muppet using them to open the cartridges instead of using the proper tool.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#3
|
|||
|
|||
That's what I am thinking any point in trying to save them or will they be scrap?
|
#4
|
||||
|
||||
Honestly the preload is pretty much a set and forget thing. Once it is set right you really do not need to muck about with it. I would not even bother with them, as long as they are set up close to each other. Unless you have the proper pin spanner tool to hold the outer and try and free the inner.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Marzocchi 45mm Forks | mcnut | Parts | 9 | 01-12-2016 10:23 AM |
45mm Marzocchi's not bleeding air | ballisticexchris | Enduro Suspension | 0 | 08-27-2015 12:06 AM |
marzocchi 45mm shiver | johall865 | Enduro Suspension | 0 | 12-28-2014 06:55 PM |
in need of some 45mm marzocchi shivers | astout93v | General Discussions & Announcements | 0 | 06-23-2011 06:41 PM |
Marzocchi 45mm Questions | stay_upright | Enduro Suspension | 8 | 02-20-2009 05:33 AM |