|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
studded tires
what kind of pressure are you guys running with studded tires?
|
#2
|
|||
|
|||
I run 12psi have not had any problems.
|
#3
|
||||
|
||||
12 psi sounds reasonable. I tend to use mousse, according to Michelin their mousses are similar to 12-13 psi or thereabout.
Sent from my GT-I9505 using Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#4
|
||||
|
||||
What kind of tires? If your running trelles you don't need mousses just use a heavy duty tube. The sidewall is stiff enough to run as low as you want. I run 8psi in the rear and have never had a flat in 6 years. I run a new set every yeAr thoughto keep that sidewall stiffness. These came in the mail on Friday!!
__________________
trevor |
#5
|
|||
|
|||
just picked up a used set of trelly knock offs same studs and tire compound is the same. I run heavy tubes just took a test ride just wasn't sure if you would run a high pressure to help the stud dig in? I have it at 12psi now. It's been years since I have ran in the winter I am really looking forward to it.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Studded Tires? | sam | Enduro Chassis & Body | 6 | 01-18-2013 02:50 PM |
studded tire | kevin | General Discussions & Announcements | 0 | 11-04-2011 03:02 PM |
Studded Tire Options... | mcnut | Enduro Chassis & Body | 0 | 12-12-2010 10:37 AM |