|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Castor based oils
Anyone running there 2 stroke gasser on pre mix castor based oil like castrol R?
Any issues? Thanks |
#2
|
||||
|
||||
i ran maxima 927 a few times. i had no issues..
|
#3
|
|||
|
|||
castor oil
no problem with the maxima 927 just a little drip on the silencer @ 2%,nice and clean @ 1.5%. rich smell.
__________________
300 racing 2009 300 Factory replica 2014 250 XC 2018 SWM 250 TF1 1981 TXT 250 2003 |
#4
|
||||
|
||||
Try mixing Castor 927 with a 50/50 MIX of VP4.2 and pump gas......sweet...
I am running it @ 45:1 and have had not top end issues after ~1,500 miles. I run it in my EC250SM on the street. Jeff |
#5
|
||||
|
||||
Do you have to re jet carb if switching from synthetic to castor based, manual says 2% if syn...or 2.5% if castor (petrol/oil mix)
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Castor 927 | gasIdaho | Enduro Intake/Carburetion - 2 stroke | 10 | 04-16-2008 10:59 PM |