2010 ec300

[BryanMcc]

2010 EC300
FMF muffler
EE hanguards
EE skidplate
EE tall seat and seat cover
EE kickstand fix
RB head mod to correct squish
JD jet kit
13t front sprocket
EE radiator braces
will have a new pirelli MT 16 on it for the new owner!

Bike bought new last January, has been an amazing bike. It runs very strong with the RB headmod. Bike has been serviced regualry ( filter cleaned/fresh trans oil, chain cleaned and lubed, ect). Bike has maybe 40-50 hours on it, oil has been mixed at 32:1. You wont be disssapointed! Reason i am selling it is i am pretty tall (6ft3) and i like the taller setup on the new 2013...Located in helena MT, will travel 4 hours one direction to deliver if need be. Make me an offer!

[Jakobi]

Its because of the headlight isn't it

Good luck on the sale and an early congratulations on the new steed!~

[BryanMcc]

Originally Posted by Jakobi

Its because of the headlight isn't it

Good luck on the sale and an early congratulations on the new steed!~

Darn you caught me LOL....No just lookinf for a taller bike Seat to footpeg distance

[desertgasser300]

The 10's in my opinion were the best looking bikes. You need a price tag on it?

[BryanMcc]

Originally Posted by desertgasser300

The 10's in my opinion were the best looking bikes. You need a price tag on it?

what kind of money should i ask for it? dealer offered my 3500 which i was hoping for more. Not many hours on it, bought it new last year. And i was thinking at that i would try to off it on my own...very nice bike, just need taller!

[jhendr3702]

Originally Posted by BryanMcc

what kind of money should i ask for it? dealer offered my 3500 which i was hoping for more. Not many hours on it, bought it new last year. And i was thinking at that i would try to off it on my own...very nice bike, just need taller!

not sure what your market is.. around here sadly they are priced at 4000-4500....

[AZRickD]

Yes, the black 2010 plastic has that look about it, eh?

The failing of that year is the suspension, I had heard -- so you might wish to inform about what components are on it now and how it was massaged by the tuner.

Four hours driving from Helena doesn't get one very far, does it?
It would still cost a bunch of diesel. Have you looked into and/or considered/priced crating it up and shipping?

I've heard anywhere between $200 and $400.

[desertgasser300]

Originally Posted by AZRickD

Yes, the black 2010 plastic has that look about it, eh?

The failing of that year is the suspension, I had heard -- so you might wish to inform about what components are on it now and how it was massaged by the tuner.

Four hours driving from Helena doesn't get one very far, does it?
It would still cost a bunch of diesel. Have you looked into and/or considered/priced crating it up and shipping?

I've heard anywhere between $200 and $400.

You know Rick, your forks will fit on that bike? Just sayin! My sachs rear worked outstanding on my old 07' after it was re-worked by Stillwell.

[AZRickD]

Understood. I'm just saying that potential buyers would benefit from the information. Ohlins vs Sachs vs Zokes. Spring rates. Tuner. Valving changes.

[desertgasser300]

My problem is the Gas Gas bikes are so damned sexy I would like one of each year and size. To bad I can only ride one at a time! This is a beautiful bike.....yes yes I'm coveting it!