Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-17-2011, 05:16 PM
dickieshep dickieshep is offline
Member
 
Join Date: May 2011
Posts: 23
Default final drive sprocket seal

I have found the seal behind my drive sprocket is leaking, is it easy to change or am I looking at a big strip down.


Reply With Quote


  #2  
Old 06-17-2011, 09:43 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Easy, comes out from the outside with a seal puller or hook once the sleeve is removed from the shaft. An o-ring also seals the rear of the sleeve. If you see oil coming from between the shaft and sleeve this is the problem, not the seal. Its a good idea to replace all three.
Reply With Quote
  #3  
Old 06-18-2011, 03:32 PM
dickieshep dickieshep is offline
Member
 
Join Date: May 2011
Posts: 23
Default

Cheers for that GMP.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Final drive seal? nick790 Enduro Engine - 2 stroke 2 10-14-2009 03:37 PM
Steel Drive Plates nr1strange Enduro Engine - 2 stroke 1 08-11-2008 09:41 AM
Final drive chain anathema Enduro Engine 4 stroke (including EFI & Exhaust) 3 04-14-2008 08:44 PM
Counter shaft Sprocket Seal Rick Enduro Engine - 2 stroke 4 12-03-2007 09:00 AM




All times are GMT -5. The time now is 02:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org