GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 03-06-2007, 03:45 AM
bxb's Avatar
bxb bxb is offline
Member
 
Join Date: Oct 2006
Location: south australia
Posts: 16
Default Valve Help

Hi everyone, need some assistance with a valve check on an 06 pampera 400.
Can't seem to find the valve clearance figures or cam journal torque figures.
Doing the job is no problem, I just need the data. If someone can supply or point me in the right direction on the web I would able to do the job right and not have to worry about seizing the cam because I was too ham fisted on the torque wrench.



Two simple rules for dirt riding,
Right hand down, try not to die.


Reply With Quote


  #2  
Old 03-06-2007, 04:25 AM
Sandman Sandman is offline
Member
 
Join Date: Jan 2007
Posts: 38
Default

Inlet 6thou Exhaust 10thou , cam caps 10Nm
Put lots of oil on the caps before you put them back on
Reply With Quote
  #3  
Old 03-06-2007, 05:31 AM
bxb's Avatar
bxb bxb is offline
Member
 
Join Date: Oct 2006
Location: south australia
Posts: 16
Default

Thanks mate, do you have a manual and if so, how did you get it.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
VALVE adjustment west aussie gas 450 Enduro Engine 4 stroke (including EFI & Exhaust) 22 03-25-2013 02:50 PM
to valve or not to valve.... that is the dilema. dank Enduro Suspension 19 05-06-2010 07:41 PM
fse 400 valve timing ??????? mcludd Enduro Engine 4 stroke (including EFI & Exhaust) 4 08-29-2009 11:54 AM
400 fse cam/valve clearances captainslow Enduro Engine 4 stroke (including EFI & Exhaust) 4 05-26-2008 05:19 PM
pwr valve knock dustbuster Enduro Engine - 2 stroke 10 08-06-2007 01:36 AM




All times are GMT -5. The time now is 06:24 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org