|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-02-2012, 05:27 PM
|
|||
|
|||
Clarke tank
Heres a queston for ya.. Right first off im annoyed that someone prior to me who has owned my bike has put a wood screw through the tank to hold the rad scoops on.. on the clarke tanks do the rad scoops still screw direct into the plastic tank?
|
|
#2
03-02-2012, 09:01 PM
|
|||
|
|||
|
The two we have both have threaded inserts molded into the tank to hold the shrouds.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!)
|
|
#5
03-03-2012, 01:40 PM
|
|||
|
|||
|
Pictures give a better description
|
|
#8
03-07-2012, 03:44 PM
|
||||
|
||||
|
red loctite ?
is that red loctite on the 5mm shroud bolts ? why
 ? blue would be better, IMO...
|
|
#9
03-07-2012, 04:57 PM
|
||||
|
||||
|
Strange as it may seem, my first two Gassers had "wood" screws that held the shrouds to the tank. Both bikes came that way from the factory, I was the original owner of both. They were both '99 models, a 200EC, and a 250 XC Six Days.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Clarke tank will not fit | southbound | Enduro Chassis & Body | 19 | 10-13-2011 12:29 PM |
| '07 GG and Clarke Tank | Berkyboy | Enduro Chassis & Body | 12 | 01-25-2007 01:14 PM |
Linear Mode
