|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Clutch Basket Crossover
My clutch basket broke last weekend. I currently have a line on a used basket, but also want to look at all my options. Stock baskets are expensive and none in the US as far as I can tell.
Has anyone ever used a CR250 basket? I have heard rumors that they may work and was wondering if it was ture. Thnks, Ed
__________________
2004 GasGas DE250 |
#2
|
|||
|
|||
I would also like to know,, my 97 gg has some time on it and the knotches are worn deep...
__________________
Steve 16 Beta 350rr 04 KTM 525 sx/exc gone 03 KTM 625 sxc-rehab unit-did its job and now gone 03 GG 250 ec-gone 97 GG 250 ec Gone |
#3
|
|||
|
|||
off topic a little here, but does anyone know what other clutch plates (steels and fibres) will fit a 09 EC300R? Assume the R and std models have the same clutch
__________________
2007 Gas Gas EC300 2005 CRF450X 2006 WR290F Wandas Bike 2007 CRF280X Rebeccas Bike |
#4
|
||||
|
||||
cr250 fibers will fit, but they are thicker than stock ones by at least .1 mm each.. i've not had a chance to get a set and mix and match and see if stack height is manageable..
|
#5
|
|||
|
|||
thanks for that, apparantly the cr250 steels fit, have a set of them on the way so will post up when I know the answer
__________________
2007 Gas Gas EC300 2005 CRF450X 2006 WR290F Wandas Bike 2007 CRF280X Rebeccas Bike |
#6
|
||||
|
||||
if you can make cr250 steels and fibers work together and end up with a manageable stack height, that would be awesome.
|
#7
|
|||
|
|||
81 cr450 fibers are the same thickness, so are cb650 fibers
|
#8
|
|||
|
|||
cr250 steels also fit, but need aftermarket ones as stock ones are ally
__________________
2007 Gas Gas EC300 2005 CRF450X 2006 WR290F Wandas Bike 2007 CRF280X Rebeccas Bike |
#9
|
||||
|
||||
i ordered a cr250 clutch kit - plates and steels - we'll see how it goes.
|
#10
|
||||
|
||||
I replaced my fiber and steel plates 2 years ago. I ordered a Barnet kit from Go.Fasters...seems to be working just fine. The basket looked really good for it's age...
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
clutch basket mod | stainlesscycle | Enduro Engine - 2 stroke | 5 | 02-09-2010 10:12 AM |
Clutch Basket | jriley43 | Enduro Engine - 2 stroke | 2 | 03-10-2009 02:12 PM |
125 clutch basket | GasGas | Enduro Engine - 2 stroke | 1 | 09-08-2008 10:46 PM |