|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Witch Spring....
Ok people after my last post about the front end very choppy ive have a re-valve and fliud change. My fluild was black and like ''ss water and the valveing was way out so that figures. So now ive dropped the forks through the yokes 8mm and back to standard setting.
Ok now the rear on my 04 300 ive got the Onlins shock and standard spring. Im around the 16 stone or 220 lb with kit. What spring do i need and were can i get one and how much will it cost me Ive got a 3hr enduro Sunday so i shall see if the re-valve has worked.... |
#2
|
||||
|
||||
I'm about your weight (230) and bought a 5.8 rear spring from TwoWheels on this board http://afterhourscycle.com/ . I think a 6.0 may have been better for me, but the 5.8 is definitely close, a HUGE improvement over the stock spring for sure!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I like Spring | PEB | Pictures & Videos | 2 | 05-29-2012 12:27 PM |
48 280 spring.. | jhendr3702 | Enduro Suspension | 3 | 06-09-2010 05:11 AM |
Spring help | jriley43 | Enduro Suspension | 0 | 05-21-2009 10:54 AM |
Spring | steve | Enduro Engine - 2 stroke | 2 | 03-03-2008 03:44 PM |
Spring/Sag ? | skid jackson | Enduro Suspension | 0 | 10-08-2006 09:35 PM |