|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Issue with Clutch Master Cylinder
The clutch MC failed on my 2014 Gas 300, fortunately I was able to get one replaced under warranty. The second one has now failed and the cost will be on me.
I spoke with a couple other Gasser's and some have had similar issues with their clutch MC's as well. Is there any other resolve than buying a new MC and hoping it doesn't happen again? |
#2
|
||||
|
||||
Quote:
__________________
Member of AMA, COHVCO, RMAR, Stay the Trail, COTPA Co-Founder of: TrailTaker My site: TrailTaker.com |
#3
|
||||
|
||||
Put a Magura on the bike.
I swapped mine out from jump street. |
#4
|
|||
|
|||
It looks like the part is covered under its warranty. Which magura MCI works? I assume you need to match the piston size.
|
#5
|
||||
|
||||
Magura 9.5
|
#6
|
||||
|
||||
This is the one I had on my 2011 GG. I went to swap it to my '15 bike and the clutch hose is different.
Version 1: The '15 will require this one. Version 2: |
#7
|
||||
|
||||
BTW. The Magura has a better engagement range than the AJP.
|
#8
|
|||
|
|||
Are the new magura's still mineral oil? or did they switch to dot 4
__________________
2006 GasGas EC300 2011 KTM 300XC |
#9
|
||||
|
||||
The Maguras use mineral oil.
|
#10
|
|||
|
|||
So found out this is a known issue yet I had to buy a replacement at my own cost
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch master cylinder - 03 EC250 | Roosta | Enduro Chassis & Body | 5 | 04-26-2014 08:57 AM |
Clutch master issue | Bulgas | Enduro Engine - 2 stroke | 13 | 01-29-2014 10:53 AM |
Clutch Master Cylinder Rebuild kit? | motogroove | Enduro Engine - 2 stroke | 7 | 08-05-2011 11:32 AM |
Looking for a clutch master cylinder assembly... | SpeedyManiac | General Discussions & Announcements | 5 | 05-09-2008 07:06 PM |